English
 |
iGR-P
iGOLDENCNC
Fiber Laser cutting machine: a laser beam that will be fired from the laser generator, which is focused into a laser beam with high power density through the optical path system.
The laser beam hits the surface of the workpiece so that the workpiece reaches the melting point or boiling point, while the high-pressure gas that is aligned with the beam will blow away the melt or vaporized metal.With the movement of the beam and the relative position of the workpiece, the material is finally cut and slit so as to achieve the purpose of cutting.Cnc Sheet Metal Cutting Machine is used to replace the traditional mechanical knife with invisible beams. It featured high precision, fast cutting, not limited to cutting pattern limitation, automatic typesetting saving material, smooth incision, low processing cost.
Metal Sheet Cutting Laser Machine speed is fast: The cutting speed of laser cutting equipment is more than 10 times that of CNC punching machine tools, and the efficiency advantage is directly reflected in the economic advantage of laser cutting. Laser cutting is of high quality: As a traditional metal cutting method, CNC punch press has a relatively large restriction, that is, the loss of material is relatively large. At the same time, from the perspective of cutting effect, it is not as good as laser cutting and usually requires secondary processing. However, There is still a lack of accuracy. The reason why laser cutting has very little damage to materials is mainly because it is a non-contact processing technology, without secondary processing, and its accuracy is better than stamping technology.
What factors will affect the cutting accuracy of Cnc sheet metal cutting machine?
There are many factors that affect accuracy. Some factors are caused by the equipment itself, such as the precision of the mechanical system, the vibration of the table, the quality of the laser beam, the auxiliary gas, the nozzle, etc. Other factors are caused by the material itself. It is caused by the physical and chemical properties of the material and the degree of reflection of the material. Other parameters such as parameters can be adjusted according to the specific processing object and the quality requirements of users, such as output power, focus position, cutting speed, auxiliary gas, etc.
How to find the focus position of Cnc Sheet Metal Cutting Machine?
The influence of the beam power density of the fiber laser on the cutting speed is very important, so it is particularly important to choose an accurate focus position. Since the expansion of the laser beam is proportional to the length of the lens, we can take advantage of this feature, and there are three easy ways to find the cutting focus position in the industry documentation:
1. Pulse method: Print the laser beam on a plastic plate, move the laser head from top to bottom, check all holes, focus on the smallest diameter.
2. Inclined plate method: Use an inclined plate below the vertical axis, move horizontally, and find the laser beam at the minimum focus.
3. Find the blue spark: Remove the nozzle part, blowing part, stainless steel plate on the machine, move the laser head up from the top, until you find the blue spark as the focus.
Currently, many manufacturers’ machines have autofocus. The auto-focus function can significantly improve the efficiency of the laser cutting machine and greatly shorten the time for punching holes on thick plates; the machine can automatically adjust to find the focus position according to different materials and thicknesses.
While laser cutting can have lower maintenance and material costs over time, for some manufacturing applications, it may be more cost-effective to use other cutting processes. For example, while both metal and non-metal materials can be laser cut, laser cutting plastic causes the emission of potentially harmful and toxic gases. These emissions necessitate airpollution control equipment, increasing the necessary equipment costs. For manufacturers and job shops starting up, although replacement and maintenance parts are relatively inexpensive, the initial investment in laser cutting equipment also tends to be much higher compared to more conventional cutting processes. Additionally, laser cutting equipment typically consumes more power and energy than other cutting processes, leading to further increases in operating costs. Altogether, the high initial equipment and operating costs may make laser cutting unsuitable for low budget operations.
We will provide a manual with simple troubleshooting of the machine, which will help you deal with common problems on the machine.
We will provide a lot of technical support and after-sale service online, just like detailed technical and installation instructions. For example, when you encounter a maintenance problem, we will make a complete and detailed video of the operation process based on the problem, it seems that I am on your side to guide you on how to deal with the problem.
3-Fast spare parts and technical assistance
Our large amount of spare parts inventory means that replacement parts will be delivered to you as soon as you are in demand. Get technical help right away by email or phone.
4-Free training services
We insist on hands-on training for customers on each machine sold. The training is free and we will cooperate with you to ensure that you operate comfortably with your new machine.
We feel proud of our expertise and educational ability for installing, properly maintaining and most effectively using iGOLDENCNC machines.
5-Special design, customized, OEM order
iGOLDENCNC is willing to help you realize your special ideas and requirements with our innovative ability. Therefore, when you need specially designed or customized machines and OEM machines, please contact us immediately.
In 2012, after the woodworking machinery and panel furniture production line is used for 4 years, we were deeply troubled by the high price and low quality of the woodworking machinery market. After-sales problems such as precision inaccuracy and flying dust often occur during using, so iGOLDENCNC was created. iGOLDENCNC hired a team of engineers with 20 years of industry experience. Each accessory was tested and screened more than 30 times to produce the first whole-house custom furniture production line. And in the same year, the production line was brought to the CIFM exhibition, and got more attention and praise from professional customers and received dozens of orders.
Our products include: co2 laser engraving machine, co2 laser cutting machine, laser marking machine, fiber laser cutting machine, cnc router machine, metal plasma cutting machine and so on .
iGOLDENCNC was officially established, achieving breakthrough from 0 to 1, and 1 to 100.
Do I need to calibrate the CNC router?
Yes. The CNC router must be calibrated on a regular basis to avoid any potential error in the machining process, in order to meet the customer’s demands as always. In accordance with the manufacturer’s original specifications, CNC machine calibration aims to diagnose and correct errors that may deviate over time.
How to choose between the linear ATC or carousel ATC?
Carousel ATC tool change action more fast. And the linear ATC structure is simple and reliable, but spend more time on tool change.
Do I need to replace the collets of the CNC router?
Yes. The collet is a small part used to physically secure a CNC router cutter to the spindle motor shaft of the CNC router. The collets fall into multiple types and sizes according to the design of CNC router spindle motor shaft and the cutter holder. It is necessary to replace the collets regularly in the daily maintenance of the CNC router. This can ensure better performance, longer service life and better results of the CNC router cutters. If you use your CNC router every day, you may need to replace the collets every three months.
Are CNC machines equipped with software?
Yes, you can rest assured that our machine is equipped with Type3, ArtCAM and other software to facilitate your operation of the machine.
Is CNC machine difficult for beginners?
If you have the basic knowledge of computer and are willing to spend a little time to learn, then it will be very simple, we have provided help for many CNC machine beginners, it is not difficult. When you order CNC machine tools from iGOLDENCNC, we will send you user manuals and operating videos. You can also get 24/7 free online services via email, whatsapp, Skype, etc. real-time chat or remote desktop.
Do you also sell CNC accessories?
Yes, we offer customer with CNC accessories including CNC router machine accessories (CNC router parts, CNC router bits, CNC router tools), CNC laser machine parts.
How long is the delivery time?
For standard machines, it would be 7-10 days;
For non-standard machines and customized machines according to client s specific requirements, it would be 15-20 days.
The exact time will be depended on your order quantity and customized level.
This is the first time I buy the machine, is it easy to operate?
There are guide video that show how to use machine and English operation manual send to you with machine.
If it is hard for you learning, we can also help you by “Team viewer”online, with Wechat or Skype explain.
Return Policy
New CNC machines from iGOLDENCNC carry a 2-years warranty that’s effective from the date of shipping. CNC machines sold through dealers must be registered with iGOLDENCNC within 30 days of purchase to be covered by this warranty. iGOLDENCNC guarantees all new machines sold to be freed from manufacturers defective workmanship, parts and materials. We’ll repair or replace, for free of charge, any parts determined by iGOLDENCNC to be a manufacturer’s defect. We require that the defective item/part be returned to iGOLDENCNC with the complaint. within the event the item/part is decided to be damaged thanks to lack of maintenance, cleaning, and/or misuse/abuse, the customer are going to be liable for the value to exchange the item/part, plus all related shipping charges. This limited warranty doesn’t apply to natural disasters; acts of terrorism; normal wear and tear; product failure thanks to lack of maintenance or cleaning; damage caused accidentally , neglect, lack of or inadequate dust collection; and/or misuse/abuse or damage caused where repair or alterations are made or attempted by others.
All items being returned to iGOLDENCNC must have a return merchandise authorization number (RMA) issued by the Customer Service Department. Products must be returned within 30 days from delivery date. No merchandise shall be returned without an RMA number. Unapproved returns are subject to a 30% stocking fee plus trip shipping charges.
iGOLDENCNC isn’t liable for additional tools or modifications sold or performed (other than from/by iGOLDENCNC) on any iGOLDENCNC CNC machine. Warranty could also be voided upon the addition of such described tools and/or modifications, determined on a case-by-case basis by iGOLDENCNC.
Normal user alignment, adjustment, tuning, and machine settings aren’t covered by this warranty. it’s the responsibility of the user to know basic CNC machinery settings and procedures and to properly maintain the equipment in accordance with the standards provided by the manufacturer.
Parts, under warranty, are shipped at iGOLDENCNC’s cost either by carrier , FEDEX ground service or an identical method. Technical support to put in replacement parts is primarily provided by phone, fax, e-mail or iGOLDENCNC Customer Support Website. The labor required to put in replacement parts is that the responsibility of the user.
iGOLDENCNC isn’t liable for damage or loss caused by a freight company or other circumstances not in our control. All claims for loss or damaged goods must be notified to iGOLDENCNC within day of delivery. Please contact our Customer Service Department for more information.
Only new CNC machines sold to the first owner are covered by this warranty. For warranty repair information, call 0086-18660188728.
When a return merchandise authorization number (RMA) is issued, the customer has 30 days to return the part; otherwise, that number is canceled and therefore the return won’t be accepted. No merchandise shall be returned without an RMA number.
Replacement parts/ accessories/ machines are sent freed from charge providing the item being replaced is returned to iGOLDENCNC within 30 days.
Please keep all the packaging materials to repack the parts / accessories / machine being replaced. If the item may be a small item a return label are going to be enclosed in your package. don’t throw this away. Please package the item and write both inside and out of doors of the box the RMA number which was provided through an email and or verbally at the time of the request.
In the event that the item (CNC machine) isn’t returned to iGOLDENCNC, you’ll be liable for the value of the item. Your account are going to be billed. No service are going to be given until this balance is paid or the item returned in fitness.
Fiber Laser cutting machine: a laser beam that will be fired from the laser generator, which is focused into a laser beam with high power density through the optical path system.
The laser beam hits the surface of the workpiece so that the workpiece reaches the melting point or boiling point, while the high-pressure gas that is aligned with the beam will blow away the melt or vaporized metal.With the movement of the beam and the relative position of the workpiece, the material is finally cut and slit so as to achieve the purpose of cutting.Cnc Sheet Metal Cutting Machine is used to replace the traditional mechanical knife with invisible beams. It featured high precision, fast cutting, not limited to cutting pattern limitation, automatic typesetting saving material, smooth incision, low processing cost.
Metal Sheet Cutting Laser Machine speed is fast: The cutting speed of laser cutting equipment is more than 10 times that of CNC punching machine tools, and the efficiency advantage is directly reflected in the economic advantage of laser cutting. Laser cutting is of high quality: As a traditional metal cutting method, CNC punch press has a relatively large restriction, that is, the loss of material is relatively large. At the same time, from the perspective of cutting effect, it is not as good as laser cutting and usually requires secondary processing. However, There is still a lack of accuracy. The reason why laser cutting has very little damage to materials is mainly because it is a non-contact processing technology, without secondary processing, and its accuracy is better than stamping technology.
What factors will affect the cutting accuracy of Cnc sheet metal cutting machine?
There are many factors that affect accuracy. Some factors are caused by the equipment itself, such as the precision of the mechanical system, the vibration of the table, the quality of the laser beam, the auxiliary gas, the nozzle, etc. Other factors are caused by the material itself. It is caused by the physical and chemical properties of the material and the degree of reflection of the material. Other parameters such as parameters can be adjusted according to the specific processing object and the quality requirements of users, such as output power, focus position, cutting speed, auxiliary gas, etc.
How to find the focus position of Cnc Sheet Metal Cutting Machine?
The influence of the beam power density of the fiber laser on the cutting speed is very important, so it is particularly important to choose an accurate focus position. Since the expansion of the laser beam is proportional to the length of the lens, we can take advantage of this feature, and there are three easy ways to find the cutting focus position in the industry documentation:
1. Pulse method: Print the laser beam on a plastic plate, move the laser head from top to bottom, check all holes, focus on the smallest diameter.
2. Inclined plate method: Use an inclined plate below the vertical axis, move horizontally, and find the laser beam at the minimum focus.
3. Find the blue spark: Remove the nozzle part, blowing part, stainless steel plate on the machine, move the laser head up from the top, until you find the blue spark as the focus.
Currently, many manufacturers’ machines have autofocus. The auto-focus function can significantly improve the efficiency of the laser cutting machine and greatly shorten the time for punching holes on thick plates; the machine can automatically adjust to find the focus position according to different materials and thicknesses.
While laser cutting can have lower maintenance and material costs over time, for some manufacturing applications, it may be more cost-effective to use other cutting processes. For example, while both metal and non-metal materials can be laser cut, laser cutting plastic causes the emission of potentially harmful and toxic gases. These emissions necessitate airpollution control equipment, increasing the necessary equipment costs. For manufacturers and job shops starting up, although replacement and maintenance parts are relatively inexpensive, the initial investment in laser cutting equipment also tends to be much higher compared to more conventional cutting processes. Additionally, laser cutting equipment typically consumes more power and energy than other cutting processes, leading to further increases in operating costs. Altogether, the high initial equipment and operating costs may make laser cutting unsuitable for low budget operations.
We will provide a manual with simple troubleshooting of the machine, which will help you deal with common problems on the machine.
We will provide a lot of technical support and after-sale service online, just like detailed technical and installation instructions. For example, when you encounter a maintenance problem, we will make a complete and detailed video of the operation process based on the problem, it seems that I am on your side to guide you on how to deal with the problem.
3-Fast spare parts and technical assistance
Our large amount of spare parts inventory means that replacement parts will be delivered to you as soon as you are in demand. Get technical help right away by email or phone.
4-Free training services
We insist on hands-on training for customers on each machine sold. The training is free and we will cooperate with you to ensure that you operate comfortably with your new machine.
We feel proud of our expertise and educational ability for installing, properly maintaining and most effectively using iGOLDENCNC machines.
5-Special design, customized, OEM order
iGOLDENCNC is willing to help you realize your special ideas and requirements with our innovative ability. Therefore, when you need specially designed or customized machines and OEM machines, please contact us immediately.
In 2012, after the woodworking machinery and panel furniture production line is used for 4 years, we were deeply troubled by the high price and low quality of the woodworking machinery market. After-sales problems such as precision inaccuracy and flying dust often occur during using, so iGOLDENCNC was created. iGOLDENCNC hired a team of engineers with 20 years of industry experience. Each accessory was tested and screened more than 30 times to produce the first whole-house custom furniture production line. And in the same year, the production line was brought to the CIFM exhibition, and got more attention and praise from professional customers and received dozens of orders.
Our products include: co2 laser engraving machine, co2 laser cutting machine, laser marking machine, fiber laser cutting machine, cnc router machine, metal plasma cutting machine and so on .
iGOLDENCNC was officially established, achieving breakthrough from 0 to 1, and 1 to 100.
Do I need to calibrate the CNC router?
Yes. The CNC router must be calibrated on a regular basis to avoid any potential error in the machining process, in order to meet the customer’s demands as always. In accordance with the manufacturer’s original specifications, CNC machine calibration aims to diagnose and correct errors that may deviate over time.
How to choose between the linear ATC or carousel ATC?
Carousel ATC tool change action more fast. And the linear ATC structure is simple and reliable, but spend more time on tool change.
Do I need to replace the collets of the CNC router?
Yes. The collet is a small part used to physically secure a CNC router cutter to the spindle motor shaft of the CNC router. The collets fall into multiple types and sizes according to the design of CNC router spindle motor shaft and the cutter holder. It is necessary to replace the collets regularly in the daily maintenance of the CNC router. This can ensure better performance, longer service life and better results of the CNC router cutters. If you use your CNC router every day, you may need to replace the collets every three months.
Are CNC machines equipped with software?
Yes, you can rest assured that our machine is equipped with Type3, ArtCAM and other software to facilitate your operation of the machine.
Is CNC machine difficult for beginners?
If you have the basic knowledge of computer and are willing to spend a little time to learn, then it will be very simple, we have provided help for many CNC machine beginners, it is not difficult. When you order CNC machine tools from iGOLDENCNC, we will send you user manuals and operating videos. You can also get 24/7 free online services via email, whatsapp, Skype, etc. real-time chat or remote desktop.
Do you also sell CNC accessories?
Yes, we offer customer with CNC accessories including CNC router machine accessories (CNC router parts, CNC router bits, CNC router tools), CNC laser machine parts.
How long is the delivery time?
For standard machines, it would be 7-10 days;
For non-standard machines and customized machines according to client s specific requirements, it would be 15-20 days.
The exact time will be depended on your order quantity and customized level.
This is the first time I buy the machine, is it easy to operate?
There are guide video that show how to use machine and English operation manual send to you with machine.
If it is hard for you learning, we can also help you by “Team viewer”online, with Wechat or Skype explain.
Return Policy
New CNC machines from iGOLDENCNC carry a 2-years warranty that’s effective from the date of shipping. CNC machines sold through dealers must be registered with iGOLDENCNC within 30 days of purchase to be covered by this warranty. iGOLDENCNC guarantees all new machines sold to be freed from manufacturers defective workmanship, parts and materials. We’ll repair or replace, for free of charge, any parts determined by iGOLDENCNC to be a manufacturer’s defect. We require that the defective item/part be returned to iGOLDENCNC with the complaint. within the event the item/part is decided to be damaged thanks to lack of maintenance, cleaning, and/or misuse/abuse, the customer are going to be liable for the value to exchange the item/part, plus all related shipping charges. This limited warranty doesn’t apply to natural disasters; acts of terrorism; normal wear and tear; product failure thanks to lack of maintenance or cleaning; damage caused accidentally , neglect, lack of or inadequate dust collection; and/or misuse/abuse or damage caused where repair or alterations are made or attempted by others.
All items being returned to iGOLDENCNC must have a return merchandise authorization number (RMA) issued by the Customer Service Department. Products must be returned within 30 days from delivery date. No merchandise shall be returned without an RMA number. Unapproved returns are subject to a 30% stocking fee plus trip shipping charges.
iGOLDENCNC isn’t liable for additional tools or modifications sold or performed (other than from/by iGOLDENCNC) on any iGOLDENCNC CNC machine. Warranty could also be voided upon the addition of such described tools and/or modifications, determined on a case-by-case basis by iGOLDENCNC.
Normal user alignment, adjustment, tuning, and machine settings aren’t covered by this warranty. it’s the responsibility of the user to know basic CNC machinery settings and procedures and to properly maintain the equipment in accordance with the standards provided by the manufacturer.
Parts, under warranty, are shipped at iGOLDENCNC’s cost either by carrier , FEDEX ground service or an identical method. Technical support to put in replacement parts is primarily provided by phone, fax, e-mail or iGOLDENCNC Customer Support Website. The labor required to put in replacement parts is that the responsibility of the user.
iGOLDENCNC isn’t liable for damage or loss caused by a freight company or other circumstances not in our control. All claims for loss or damaged goods must be notified to iGOLDENCNC within day of delivery. Please contact our Customer Service Department for more information.
Only new CNC machines sold to the first owner are covered by this warranty. For warranty repair information, call 0086-18660188728.
When a return merchandise authorization number (RMA) is issued, the customer has 30 days to return the part; otherwise, that number is canceled and therefore the return won’t be accepted. No merchandise shall be returned without an RMA number.
Replacement parts/ accessories/ machines are sent freed from charge providing the item being replaced is returned to iGOLDENCNC within 30 days.
Please keep all the packaging materials to repack the parts / accessories / machine being replaced. If the item may be a small item a return label are going to be enclosed in your package. don’t throw this away. Please package the item and write both inside and out of doors of the box the RMA number which was provided through an email and or verbally at the time of the request.
In the event that the item (CNC machine) isn’t returned to iGOLDENCNC, you’ll be liable for the value of the item. Your account are going to be billed. No service are going to be given until this balance is paid or the item returned in fitness.
