1500w High Power Fiber Laser Cutting Machine Metal

Our high power fiber laser cutting machine has high rigidity enhanced lathe bed, aviation cast aluminum beam, advanced laser source and top-rated transmission parts to ensure high-precision and high-efficiency cutting. The control system on these cutting machines is highly integrated, simple and easy to operate. Our laser machines are not only practical but economical as well which makes them a total steal.

fiber laser cutting machine with exchange pallet has faster cutting speed and high power laser source (1000W, 2000W, 3000W, 4000W, 6000W) compared to other cutting solutions, now the high power laser cutting machine for sale at affordable price. laser cutting machine has the characteristics of low price and good stability, but the energy efficiency is generally less than 3%. At present, the output power of the product is mostly below 800W. Due to the small output energy, it is mainly used for punching and thin plate cutting

Metal Sheet Cutting ability

fiber laser 1500w is applied to metal materials such as mild steel, stainless steel, aluminum alloy, pickling plate, galvanized sheet, silicon steel plate, electrolytic plate, titanium alloy, manganese alloy. The laser cutting can process with a thickness range of 0.5-40mm Mild steel, 0.5-40mm Stainless steel, 0.5-40mm Aluminum, 0.5-8mm Copper

Stainless Steel Cutters: Air-supported Stainless Steel Cutting

There is no need for consuming assist gas in stainless steel cutting, the new technology consumes less but offers a better cutting quality. The air-supported cutting technology ensures high-speed but better cutting quality for stainless cutting, compared with stainless cutting supported by nitrogen and oxygen. Han’s steel sheet laser cutting machine brings you better cutting experience.

Ms Plate Cutting Machine: Brightness Carbon Steel Cutting Technique

Are you annoyed by an imperfect cross-section in process carbon steel? The surface is not smooth enough as a finished processed component. The extra-second surface treatment is obligatory to ensure flawless finished workpieces. Our brightness MS cutting technique highly enhances MS processing quality and quantity, the bright cross-section with a thickness can up to 40mm. The end workpieces are smoother, more precise and nearly perfectly vertical compared with others. Our ms plate cutting machine also works for stainless steel and copper laser cutting.

START UP SEQUENCE OF 1KW FIBER LASER CUTTING MACHINE

1. Check whether there are any items in the operation range of the machine tool that affect the safe operation;

2. Turn on the main power switch and each branch control power switch of the fiber laser cutting machine;

3. Open the voltage regulator and check whether the operation state of the regulator is normal;

4. Turn on the power switch of the fiber laser, and then start the key switch to let the fiber laser with air conditioner or internal desuperheater run for more than 30 minutes;

5. Turn on the air compressor when the power switch of the fiber laser is turned on for 20 minutes to check whether the air compressor operates normally;

6. Open the air control valve of the air circuit, open the cold dryer, and check whether the running state of the cold dryer is normal and whether the air pressure is normal;

7. According to the cutting needs, open the cutting auxiliary gas control valve and check whether the cutting auxiliary gas pressure is normal;

8. Turn on the power switch of the machine tool, and press the power on button to start the machine tool control system. After the control system starts normally, the machine tool returns to the original point;

9. Turn on the power switch of the fiber laser and run for more than 30 minutes, then turn on the water chiller and check whether the water chiller runs normally;

10. When the actual temperature of high and low temperature water in the chiller reaches the set temperature difference of one degree, apply high voltage to the fiber laser and check whether the fiber laser is in normal operation;

Why Is It Beneficial to Use Parts Cut With a Fiber Laser?

The main reason to employ fiber laser cutting techniques is to reduce the mechanical stress that a sheet metal form experiences while being cut. Lasers help to eliminate the impact stress that can adversely affect sheet metal products during cutting, and beyond that, the heated zone is incredibly small. This means that the rest of the work piece is exposed to little or no heat, preserving the properties of the material being handled, which is incredibly important.

Also, it’s important to consider that since laser cuts can be made incredibly close to one another without negatively impacting the sheet metal, they help to minimize waste— closer cuts allow you to make more parts per square foot of sheet metal you use.

For more information on the benefits of using laser cutting for your parts, contact CAMM Metals.