Publish Time: 2020-12-07 Origin: Site
The UV laser machine is a technology very different from CO2 and Fiber laser technology.
Today we are going to explain the main differences between this technologies.
Cold laser engraving
Also knows as the blue laser beam, this technology has the capacity of engraving with a low rate of heat.
The light wave or UV light spectrum of this UV laser marking machine is one of the main reasons this technology can engrave over different materials.
Because it doesn’t heat the material surface as the Fiber and the CO2 does.
It allows the UV laser mark clear and with high precision over all the plastics and other materials that have an adverse reaction with heat.
Plastics
There are thousands of different mix of plastics, and all of them can be engraved for UV laser technology.
These are some of the most common plastics engraving with our laser marking machine.
Metals
The UV laser it can engrave and mark metals, but not always with the same effect as the fiber laser engraver machine.
While a fiber laser cutter can etch over the metal surface with deep effect and with a clear result.
The UV laser marking machine has problems engraving metals covered with painting, or metals highly reflective like the copper.
Check below the list of metals that the UV laser can engrave.
Glass
The UV laser is one of those technologies that can engrave over glass surfaces without a break or overheat the material.
You can create amazing engravings and patterns without splinter glass result.
The continuous line we see by eyes turns out that is composed by many laser spots.
The high value we set at marking frequency,the denser laser spot we get and more smoothness we will get on the marking workpiece.
In addition to UV laser marking machines, we also provide various types of laser marking machines, which can meet the requirements of processing different types and sizes of materials. If you want to buy a laser marking machine, you can leave us a message and we will reply you as soon as possible.