Buy Laser Marking Machine 20W Fiber Portable

The laser marking machine, also known as a laser etching machine, is certainly the best marking tool available. It can etch permanent marks on a wide range of materials. Our Laser marking offers high-quality permanent marking that is fast and reliable. It is hard to damage the marks made by these machines – not even oils, vapors, emulsion, high temperatures, and other extreme operating environments can affect them.

Laser marking machine is done through a non-contact process with lower costs of operation and consumables than other marking methods. Furthermore, you can use the laser marker to impose texts, codes, and other useful information like serial numbers on your products.

What materials can be marked with a laser?

Metals

Stainless steel, aluminum, gold, silver, titanium, bronze, platinum or copper

Plastics

ABS, polycarbonate, polyamide, PMMA or plastics with laser additives

Other materials

Foils and films, Laminates, Paints

How to operate laser marking machine?

The users need to follow the instructions of the laser engraving machine for safe operation. And it needs to start the 20W Fiber Portable strictly in accordance with the laser start-up procedures.

Operators must accept the training for technology and operation and are familiar with the structure and performance of the machine. They need to master relevant knowledge of the operating system.

Before starting the machine, the operators should wear labor protection equipment as required. They must also wear protective glasses that meet the requirements near to the laser beam.

After turning on the machine, the operators manually drive the machine along X and Y axes at low speed. This is to check whether there is any abnormality.

After inputting the program for a new work-piece, it needs to do a test run first and check the operation status.

During the process of working, the operators need to pay attention to observe the operation of the machine tool. This is to avoid accidents caused by the engraving machine beyond the effective travel range or collisions.

During the operation, it needs to keep the laser, working table, and the surrounding area clean, orderly, and free of oil pollution. The workpiece, plates, and waste materials need to be stacked as required.

It shall maintain the laser engraving machines regularly, in order to increase the service life, save costs, and create greater benefits.

What Are The Advantages of laser marking machine?

1. Accurate and meticulous: the engraving accuracy can reach 0.02mm.

2. Consistent effect: Ensure that the engraving effect of the same batch is completely consistent. 3. Safe and reliable: Non-contact processing is adopted, which will not cause mechanical extrusion or mechanical stress on the material. No "knife marks", not damage the surface of the processed parts, not deform the material.

4. Eco-friendly: The diameter of the light beam and light spot is small, generally less than 0.5mm, saving materials, safety and hygiene.

5. Wide range: CO2 laser can engrave and cut almost any non-metallic material. And the price is low.

6. High-speed: can immediately engrave and cut according to the pattern output by the computer. 7. Low cost: Not limited by the number of engraving, laser engraving is cheaper for small batch engraving services.