CO2 Laser Cutting Machine CO2 Laser Engraver

With the complexity of the engraving process, traditional manual processing and machining are restricted by equipment and technology, which affects the quality of the product to a certain extent, and even more affects the economic benefits. The CO2 laser cutting machine engrave the material with the thermal energy of the laser. Compared with the traditional manual engraving method, the laser engraving machine has the advantages of wide application range, high processing precision and fast processing speed, especially in the processing effect, which is no less than the craft level of hand engraving. It is precisely because the laser engraving machine has so many advantages, it is gradually replacing the traditional engraving method as the main engraving equipment accepted by the majority of users. Today, follow the IGOLDENCNC to learn more the information about the co2 laser engraving machine.

CO2 laser cutting machine features

1. Equipped with the mixed laser head, it can be used to process metal and nonmetal materials.

2. Designed with advance control system and driver to guarantee the stability and accuracy of machine.

3. With the auto-focusing laser head, cutting and engraving depth can be adjusted automatically. So there is no need to making the second processing.

4. With a wide range of applications, it widely used in advertising industry handicraft production, decoration, rubber plate furniture and other industries.

Daily maintenance of Laser Engraving Machine

Daily maintenance of co2 laser engraver

CO2 laser cutting machine is an important laser cutting machine.Its daily maintenance is also very important.What are the main maintenance methods?

1. Replace the water and clean the water tank (it is recommended to clean the water tank and replace the circulating water once a week)

Note: Make sure the laser tube is filled with circulating water before the machine works.

The quality and temperature of the circulating water directly affect the service life of the laser tube.It is recommended to use pure water, the temperature of which should be controlled below 35℃.When the temperature exceeds 35℃, the circulating water should be replaced or ice should be added to the water to reduce the water temperature.It is recommended that users choose one cooler or use two tanks.

Clean the water tank: First, turn off the power, pull out the water inlet pipe, let the water in the laser tube flow into the tank automatically, open the tank, take out the water pump, and remove the dirt from the pump.Clean the water tank, replace the circulating water, return the water pump to the tank, insert the water pipe connecting the water pump into the inlet, and arrange the connector.Start the pump separately and run for 2-3 minutes (make the laser tube full of circulating water).

2. Fan cleaning

Long-term use of the fan will make the fan accumulate a lot of solid dust, make the fan produce a lot of noise, is not conducive to smoke and deodorization.When the suction of the fan is insufficient and the exhaust pipe is not smooth, first turn off the power, remove the air inlet and exhaust pipe on the fan, remove the internal dust, then reverse the fan, pull the internal blade clean, and then install the fan.

3. Lens cleaning (it is recommended to clean the lens before work every day, and the equipment must be turned off)

In the previous introduction to the machine, it was mentioned that the engraving machine has three mirrors and a focusing mirror (the first mirror is located at the laser tube transmitter, i.e. the upper left corner of the machine, the second mirror is located at the left end of the beam, the third mirror is located at the top of the fixed part of the laser head, and the focusing mirror is located in the adjustable tube under the laser head).The laser is reflected and focused by these mirrors, and then emitted from the laser.The lens is prone to dust or other pollutants, resulting in laser loss or lens damage.No. 1 and No. 2 lenses do not need to be removed during cleaning. Just wipe the lens paper carefully and dip the cleaning solution into the center of the lens to the edge of the lens.The No. 3 lens and the focus lens need to be removed from the frame, wiped in the same way, and then installed after the wipe.

Note: 1 the lens should be gently wiped without damaging the surface coating;2. The lenses should be treated gently to prevent falling off during wiping;When installing the focusing lens, keep the concave surface downward.

4. Cleaning of guide rail (it is recommended to clean it once every half a month and turn off the machine)

As one of the core parts of the equipment, guide and straight spool play a guiding and supporting role.In order to ensure the high machining precision of the machine tool, the guide rail and the straight line are required to have high guiding precision and good motion stability.During the operation of the equipment, a lot of corrosive dust and soot will be produced during the processing.A large amount of dust accumulates on the surface of guide rail and straight bobbin for a long time, which has a great influence on the machining accuracy of the equipment. Corrosion points will form on the surface of guide rail bobbin, shortening the service life of the equipment.In order to ensure the normal and stable operation of the machine and the processing quality of the product, the daily maintenance of guide rail and straight spool must be done.

Daily maintenance of CO2 laser cutting machine is very important, it will directly affect the efficiency improvement.

Applicable material: wood, bamboo, jade, acrylic, leather, garment, marble, ceramic, paper, glass, rubber and other nonmetal material.

Applicable Industry: advertisement, arts and crafts, toys, garments, mould, package and paper industry etc.