Guide to buying wood engraving machines

This machine working table is: T-Slot, working size is: 1300x2500x200mm with 3kw/1.5kw/2.2kw/5.5/4.5/7.5 w water cooling spindle power, it can engrave and cut the wood MDF acrylic ABS copper alumnium brass and other metal and nonmetal to do the 3D work.

It can cut and engave on the wood/MDF.....if with 1.5kw/2.2kw water cooling spindle, it is mainly used it to do the engraving work, but it aslo can do the cut work, for example, if cut more thick wood/ MDF (more than 30mm) it need to cut many times, then can cut down, but the edge is smooth. if with 3kw water cooling spindle it can cut 20mm thickness wood /MDF for one time, if the power is more bigger, more thick of the wood and MDF the machine can cut.  Because woodworking engraving machine is more and more widely used in real life, so many customers choose to use woodworking engraving machine as the first choice of processing equipment, then how to choose the applicable engraving machine?Engraving machine of choose and buy what place need to pay attention to?Today we will talk about the purchase of woodworking engraving machine matters needing attention.

    1: industry

    Experienced people know that the wood carving machine specialized in woodworking industry, but it has a variety of models, such as decoration, soft, hard package coffin coffin, wooden door, cabinet door, wardrobe and panel furniture so to realize their first before buying or to do trade, hollow out beautiful case,  soft package hard package industry is used three process engraving machine and laser engraving machine, coffin coffin for double or three general woodworking engraving machine, can be detached  wooden door cabinet door will use three or four process engraving machine,And wardrobe and board furniture industry needs four working procedures of material opening machine or disc type automatic tool opening machine.

    2: configuration

    Generally speaking, woodworking engraving machine is mainly divided into standard and high with two kinds, and spindle motor, driver, work system and control system of advanced accessories, here involved in the price of high and low, so the user should make a decision according to their own economic situation.

    1) Spindle motor

    For woodworking engraving machine spindle motor is not the power is the bigger the better, according to their own materials and technology with a suitable for their own spindle motor, can be done to improve production efficiency, and save resources.General low power spindle motor is mainly used in advertising industry and small handicrafts for fine processing, mainly used in relief.Because its power is small, the ability to cut off the thicker material is relatively poor, not suitable for carving and milling the thicker material.And general high power woodworking engraving machine spindle motor is mainly used for cutting, carving and milling because of its power, cutting ability is strong.

    2) Transmission system

    The transmission system of general wood carving machine will choose rack guide rail, rack is generally divided into straight teeth and oblique teeth, oblique teeth relative to straight teeth transmission, the degree of bite equipment to be better, high precision.In addition, the Y axis requires two driving motors (one on both sides) to drive the X axis and one on the z-axis lead screw.Guide rail is generally divided into square rail and circular rail, square rail load capacity and accuracy to maintain the ability is a number of times the circular guide rail, general large surface woodworking engraving opportunity to choose formula rail as the transmission system, so not only can improve the processing accuracy, but also can improve the service life of woodworking engraving machine equipment.

    3) Driving system

    General woodworking engraving machine drive system can be selected with two kinds, namely three - phase stepping motor and servo motor.The servo motor belongs to closed-loop control, and the speed of the motor can be measured in real time when it is powered on. Because of its large starting torque, the starting speed is fast, and the rated speed can be reached in a very short time. In addition, it has strong overload capacity, which is suitable for frequent start and stop and torque requirements.However, the stepper motor is under open-loop control, and the speed is not measured. The start is relatively slow, and a motor does not have overload capacity.If the speed and accuracy of the process requirements are very high, it is recommended to buy the engraving machine customers with servo motors.

    Based on the above three points, the choice of good service, good after sales woodworking engraving machine needs to focus on the engraving machine equipment spindle motor, drive system and drive system, especially the choice of the drive system is more important.This needs the user to choose and buy according to their own materials and speed and load conditions to carry on the targeted choice, so as to choose a more suitable woodworking engraving machine.

    3: what is the price

    The price quoted by each woodworking carving machine factory has high have low, but general and market price will not be too much wrong, if really wrong too much, then you should be more careful, or the configuration is shoddy, or poor or no after sales.

    4: after

    After-sales service is for users to buy woodworking engraving machine after, so generally for users to say it is difficult to make a judgment, it is about to see the carving machine factory in the local public praise, so spend more time to see, there is no harm, followed by a small workshop after sales must be very poor, do not have to consider.Above is the purchase of woodworking engraving machine four key words, as long as we remember these four points, will not be cheated when buying.

1. Double-head woodworking engraving machine: double spindles can work on the same pattern at the same time, which greatly improves the processing speed of the plate, and the work efficiency of the two equipments can be completed at the same time. Achieve independent work of single spindle, effectively and reasonably control production costs.

2. During batch processing, the product has good consistency and high quality.

3. The integral steel structure is welded and tempered, which is firm and not deformed. Gantry movement, fixed work surface, can process materials on the work surface at will.

4. The Y axis of the machine tool adopts rack double drive, which can perform heavy cutting.

5. Adopt embedded DSP numerical control system or PCI control card, which can realize the functions of continuation of engraving and memory of power-off, and can realize completely offline operation.

6. The double-head woodworking engraving machine is specially designed for customers who require large-volume and small workpiece processing. It is suitable for many industrial products such as cabinet doors, craft gifts, relief crafts, non-ferrous metal carving and cutting.

7.With roller could better for fix mdf or wood

Parameter Configuration