UV Laser Marking Machine adopts INNO UV Laser source, the third-order cavity frequency doubling technology, compared with infrared laser, UV lasers at 355nm provide a small-size spot and a big focal depth, short laser wavelength interrupts molecular chains of material, can greatly reduces the mechan
UV laser marking machine compared with infrared pump, metals will absorb ultraviolet rays that are higher than infrared rays. Therefore, the UV laser marking system is more suitable for the marking of metal and glass materials. The narrow pulse width shortens the material processing time, so the mat
Purple light UV laser marking machine takes 355nm pumped purple light laser device as the light source and takes advantage of previous generations machine to gain smaller diameter of focusing spot and fine marking effect. The metal absorb purple light higher than infrared and therefore more suitable
5w uv laser marking machine adopts high-quality and imported ultraviolet laser generator. The ultra-small focusing spot of 355nm ultraviolet light can ensure hyper-fine marking, the minimum marking character can be accurate to 0.01mm.CN¥41,904.72-CN¥44,444.40During the period of operating, there is
The UV laser marking machine mainly uses a UV laser generator with 355nm wavelength as the core component, and cooperates with the third-order intracavity frequency multiplication technology to integrate a high-performance UV marking machine developed by international advanced technology.The biggest
UV laser marking machine for critical and sensitive materials3 W UV laser marking machine, 4 W, 7 W, 10 W, 15 W or specified laser power can be customized to meet the production requirement.UV-3C-S is a standard single-station design. A turntable dual working station is an optional classic design.Cl
The UV laser marking machine is a high-end marking machine on the market, also price is a little expensive than others.UV laser marking machine has minimal focus spot and thermal processing area very small, so it can be used for superfine marking and special material marking.It is the first choice f