The servo motor is used as an actuator in the control system to convert the received electrical signal to the angular displacement or angular velocity output on the motor shaft. The rotor in the servo motor is a permanent magnet. U / V / W three-phase power controlled by the driver forms an electromagnetic field. At the same time, the motor's encoder delivers the signal to the drive, and the driver compares the target with the feedback value. The comparison value is adjusted to adjust the rotation angle of the rotor.

When you think of CNC working, you usually think of plastic and wood. However, CNC cutting machine can also cut aluminum (a weaker metal) well.
At the same time, you need to pay attention to some things. Not surprisingly, cutting aluminum has its complexity (unlike wood and plastic). The first thing to know is that aluminum is a "sticky" metal and it wants to stick to your cutting tools. As a result, removing the chip will be a little tricky (more on this later).

CNC laser cutter is already a general-purpose mechanical cutting tool. I believe that many users will not use it after understanding the operating steps of the laser cutting machine, and some people will only use it according to their own habits. This will inevitably have a negative impact on the use of CNC laser cutter.

Using stone cutting machine for the following reasons: 1. Can cut various materials. 2. Get a high-quality finish every time you cut, thereby increasing productivity. 3. Environmental protection means you don't have to spend money. 5. Save raw materials. 6. Get a prototype quickly

Cabinet door manufacturing has always been a hot topic for carpenters and woodworking factories. Because cabinets have always been a basic part of interior design. Whether it is used in kitchen cabinets or bedroom cabinets, aesthetics and practicality have always been the goals that people pursue. The beauty of cabinet doors is mainly reflected in the design of cabinet doors, because there are many production styles of cabinet doors.

Cabinet door manufacturing has always been a hot topic for carpenters and woodworking factories. Because cabinets have always been a basic part of interior design. Whether it is used in kitchen cabinets or bedroom cabinets, aesthetics and practicality have always been the goals that people pursue. The beauty of cabinet doors is mainly reflected in the design of cabinet doors, because there are many production styles of cabinet doors.

Nowadays, more and more CNC machine are used in the production of furniture, and in many cases batch processing is required. Customers need you to do a small amount of work and complete the work within a tight deadline, but resources are limited. The high requirements of the past have now become standard requirements.