3 Axis CNC Wood Router Machine Engraving Router

This is an entry-level 3 axis cnc wood router machine . It can meet most of your processing needs in the non-metal industry without high purchase and use costs. Of course, it is also the ideal carving equipment for the woodworking industry.

The Machine body is of thick steel tube by precise welding tempering. It has high strength and rigidity required for heavy duty work. Hand held 3D controller with user-friendly operator interface, can store 32 job files, the memory can be enlarged to 2GB. 3000W spindle with large power.

X Y Z axis linear ball bearing profile rails, precise and reliable.

3 axis cnc wood router machine features:

1) Vacuum & T-slot Combined Table for Wood Engraving Machine:  Small-scale processing by using material holder,

eliminating the need for a vacuum pump electricity;  large processing by adsorption, simple,convenient and efficient.

2) Water cooling spindle, with high precision, long life time, steady working, easy to start up.

3) Taiwan Hiwin linear square guide rail, self-lubricating sliding block. It ensures equal

force in all directions and accuracy and strength of the machine.

4) Y axis uses double-motor in-phase drive that ensure the machine equality and smoothly running.

5)  DSP controller system with USB interface,working without connecting with computer

during working and easy to control.

The following aspects are the key points for a high quality wood CNC machine:

1. The intensity

The main factors affecting the intensity is the spindle motor power, general power is 3KW or more will be perfect, the CNC tool can be clamped to 12.7mm.The parts configuration also affects the intensity of the Wood Engraving Machine .

2. Working speed

Taking into account the life of the machine, we need to pay attention to  the processing efficiency. In the efforts to achieve the premise, it can be more quickly.

3. Accuracy

Regardless of engraving and cutting must work long hours to achieve a good position, and engraving sleek straight.

4. Full-featured function

Vacuum: the traditional CNC router machine should use to fix the plate, inevitably resulting sheet can not be fully utilized, or utilized operating troubles. RUIJIECNC vacuum suction machine to engrave the plates fixed to the table top work area is divided into six panels of different sizes can be processed.

Dust cleaning : Wood Engraving Machine  is taken into account in the process of carving wood dust four environmental impact of flying, so add vacuuming to solve the problem .

Energy: Energy loss from the biggest spindle motor, the traditional need to manually control the spindle motor, it is inevitable if you forgot to shut the spindle after carving, resulting in energy waste and safety hazards. And CNC wood machine stopped working after the machine spindle automatic stop turning.

Precautions For The Use And Maintenance Of CNC Engraving Machine Tools And Fixtures

1. The size of the tool jacket of the CNC engraving machine should be appropriate. The jacket has a cross-section, the inner hole is not round enough, it is worn for a long time, and the inner hole has a taper. The jacket must not be selected, which will easily cause the tool handle to vibrate and the engraving effect is not good.

2. The tool handle of the CNC engraving machine should be matched with the jacket and be able to enter and exit the jacket smoothly. The handle should be firmly put into the jacket and tightened. If the jacket is used for too long and the inner hole is deformed, it should be replaced with a new one. Jacket.

3. Frequently check the toughness and sharpness of the CNC engraving machine tools. If the tool is found to be blunt or damaged, it is best to replace it immediately. If you continue to use it, not only the engraving effect will not be good, but also the danger of tool breakage may occur.

4. The thickness of the material to be processed must not exceed the thickness that can be cut and engraved on the blade, otherwise, the blade will be broken or the engraving effect will not be good.

5. When engraving with different materials, you should choose different tools and reasonable engraving modification speed.

6. When the CNC engraving machine is working, the high-speed rotating knives are very sharp. Be careful not to get close to the body part of the processed object, especially not to wear wide work clothes. Women should wrap their hair to prevent accidents.

7. The cutting speed of engraving should be balanced, and the cutting speed should be as consistent as possible. The cutting process of engraving should be done in one go to avoid cross-section knife marks at breakpoints.

8. The knives are best cleaned with professional cleaners.

9. If the Wood Engraving Cnc Router is not used, butter can prevent the tool from rusting.

10. The engraving tool cannot be polished or changed by itself.

Application

Wood-working industry: Ideally suitable for furniture decoration,musical instruments,wooden crafts,solid wood furniture,MDF paint-free door,wood composite door,cabinet,kitchen doors,windows,night table,etc.

Decoration industry: Art model,Wall Art,screen felief engraving and cutting,decoration processing,gifts wrapping,waved plate,electrical cabinets panels,sports equipment,and other wooden industrial products.