IGOLDENCNC foam cutting machine in China

CNC foam cutting machine with turntable is with single hot wire for cutting 3D,2D,block and tapered foam shapes.The  two ends of wire can motion at different posotions,different speed,different direction,With the turntable working,it enables the hot wire to cut some complicated foam models like spiral models,4D models etc. 

EPS Foam CNC Machine Features:

1.Two/three-dimensional CNC foam cutting machine connected by specialized fastenings creates stable performance and precise cutting.

2. Equipped with stepping motor, suits to cut the specially designed figures with requirement of adjustable speeds. The cutting precision can be 0.5mm.

3. Equipped with a piece of 3KW transformer, adjustable power output ranges from 0 to 7V under electrical control. 

4. Ability to synchronously cut 20 pieces of identical figures or letters due to 20 heating cords mounted on the cutting frame.

5. Specialized touch screen controller, easy to set parameters; 3B codes of the cutting figures/letters can be input to the controller from the U memory disk, the simple codes of figures can be entered on the touch screen. 

6. The cnc foam cutting machine process can be showed on the display screen; cutting speed is adjustable (max. 4000mm/min).

7. With function of cutting stroke protection: when exceeds the regulated cutting stroke, the machine can stop running automatically

8. With functions of parameters memory while fail of electricity; reverse cutting and rotating, mirror symmetry; clearance compensation, etc. 

Foam CNC Machine Attention:

1.EPS block should be dried before cutting to increase efficiency and avoid damage of hot wires;

2.Check cutting machine before operation to ensure reliability of ground connection, correct running direction of main cutter, air blower and limit switch;

3.Strictly prevent foam beads and cutting fragments entering into the electric system to avoid conflagration because this equipment is a strong electric current working system;

4.Maintenance and attention points of variable-speed gear box.

5.Replace lubricating oil in gear box every half a year. 

6.Keep enough lubrication oil in oil tank and check it regularly;

7.Pay attention to running condition of whole equipment during its working, Stop to check when there is any unusual situation.

8.Notice: Do not whack the gear box.

9.Fire Extinguisher must be prepared at working site and operator should monitor the machine during operation;

10.Operators is allowed to operate after training.

Foam CNC Machine Features Applications

1. wood mold, EPS foam, Lost Foam and other non-metallic materials.

2. mold industries: sculpture various large non-metallic mold can be particularly suitable for any kind foams mould, wooden ship model, wooden model aviation and other wooden mould.

3. metal mould industry: can do any model of die mould of Aluminum,copper, 2D and 3D dimension.

Parameter Configuration