Publish Time: 2022-05-20 Origin: Site
What is a stone cutting machine?
A multi-knife multi-stage stone cutting machine consisting of a cutting knife group, a stone conveying table, a positioning guide plate and a frame. The cutting knife group is placed on the upper part of the stone conveying table and placed on the frame, and the positioning guide plate is fixed between the cutting knife groups; The cutting knife group is composed of a motor, a belt, a cutter wheel shaft, and a cutting tool. The cutting tool is fixed on the cutter wheel shaft. This kind of stone bridge saw can cut stones with different depths respectively, and can process stones less than 1m3, which can turn waste into treasure, greatly save stone resources, and also help protect the environment. Various types of stones can be mechanically cut, and the processing efficiency is high. In addition, the effective use of small stones makes the production cost lower.
To achieve the above purpose, the gantry stone sawing machine of the utility model is composed of gantry post, saw blade and rail car. The sliding sleeve on the post is connected with the lifting saw frame. The shaft rod on the two sides of the center point of the saw blade shaft is a screw rod, and the two sides of the saw blade are adjusted and fixed at any position on the screw rod with a fastening nut. 1-3 saw blades are respectively fixed on the shaft rod on both sides of the saw blade shaft.
Today, I will introduce the positioning standards and common specifications of big stone cutting machine price - stone machine manufacturer:
When the saw blades of the stone cutting machine are installed, they are divided into various types of saw blades. The common ones are 1600 mm, 1800 mm and 2200 mm. The price of the cutting machine also has a certain relationship with the size of the saw blade. Of course, the price of the longer length is higher.
Next, let’s talk about the price of the big stone cutting machine and the choice of the size and specifications of its installation. Generally speaking, the manufacturer recommends the stone processing size of 11000mm×7000mm, which is 3 cubic meters for the saw blade. It is possible to install the above three types of diamond saw blades.
For the entire mechanical structure of the gantry stone sawing machine, including a frame consisting of two columns fixed on the bottom plate and an upper beam connecting the top of the two columns, the price of the stone cutting machine also has a certain standard. The main features are: the left and right saw wheels are installed on the left and right axle seats through the left and right axles, the left and right axle seats are integrated with the sliding sleeve that can slide along the column, and the left and right sliding sleeves are provided with locking The left and right sliding sleeves are connected into one through the middle beam, a motor for driving the left saw wheel is installed on the middle beam, a saw blade is installed between the left and right saw wheels, and a double output shaft motor is installed on the beam on the frame to drive the left and right The worm, the left and right worms drive the left and right worm gears, the left and right worm gears each drive a wire machine to adjust the left and right sliding sleeves, the left and right wire machines are connected to the left and right sliding sleeves through a wire nut, and one end of the above-mentioned saw wheel has a belt There are bosses, and the angle between the left and right wheel axis lines is less than 100 degrees.
Therefore, if you want to understand the positioning standard of the big stone cutting machine price it is indispensable to look at the choice of product specifications.
According to a large number of market surveys, it is shown that the head and worktable of the bridge cutting machine can be rotated at an angle, so it has the characteristics of smooth operation and convenient use compared with ordinary cutting machines
1. The new technology of infrared knife setting is adopted
Compared with the traditional stone cutting machine, the bridge cutting machine has a new upgrade in the selection of cutting knives. The traditional stone cutting machine uses the ordinary cutting knife set. This kind of cutting knife set is bulky and slow in cutting speed, and the post-maintenance rate is still very high. The new bridge cutting machine adopts the new technology of infrared knife setting, so it can Use infrared laser focusing to achieve precise cutting.
2. Upgraded microcomputer control technology
Compared with the traditional stone cutting machine, the bridge cutting machine has upgraded the microcomputer control technology. Traditional stone cutting machines are relatively rigid and most of them use manual control technology, so the cutting efficiency is relatively low; while the new bridge cutting machine adopts microcomputer control technology, which can more accurately control the walking route, cutting speed and rotation angle .
3. Added hydraulic transmission function
According to a large number of practical survey data, the bridge cutting machine has added hydraulic transmission function compared with the traditional stone cutting machine. The establishment of the hydraulic transmission device facilitates better energy transmission and control, and also helps to achieve better energy conversion, while the traditional stone cutting machine does not have this function, so the cutting power is slightly insufficient.