How To Choose A Reliable Bridge Granite Cutting Machine Manufacturer?

Bridge cutting machine is widely used in construction, decoration and other industries, with water environmental protection operations, especially suitable for construction engineering, laboratory stone processing, core sample cutting, building materials construction site, etc.

How to choose a reliable granite cutting machinemanufacturer?

First of all, when choosing a granite cutting machine, choose a manufacturer with good reputation and influence. Because this factory has a good reputation, it means that many people have used it and the quality is guaranteed.

Second, choose the machine that suits you. For example, whether the stone you cut is marble or granite, or you have more types of stone, you can choose according to your actual situation.

In the process of mechanical processing, the common methods of sheet cutting are manual cutting, semi-automatic cutting machine cutting and CNC cutting machine cutting. Manual cutting is flexible and convenient, but the quality of manual cutting is poor, the size error is large, the material waste is large, and the subsequent processing workload is large. At the same time, the labor conditions are harsh and the production efficiency is low. The contour cutting machine in semi-automatic cutting machine has good quality for cutting workpieces. Because it uses cutting dies, it is not suitable for cutting single pieces, small batches and large workpieces. Although other types of semi-automatic cutting machines reduce the labor intensity of workers, their functions are simple, and they are only suitable for cutting parts with more regular shapes. Compared with manual and semi-automatic cutting methods, CNC cutting can effectively improve the efficiency and quality of sheet metal cutting and reduce the labor intensity of operators. With the development of modern machinery industry, the work efficiency and product quality requirements for sheet metal cutting are also increasing. Therefore, the market potential of CNC cutting machine is still great, and the market prospect is relatively optimistic.

Operating procedures Of bridge saw for granite:

1. Before work

1. Wear work clothes and goggles. The female worker has her long hair curled up and put on a work cap.

2. Carry out detailed inspection on the power switch, the tightness of the saw blade, the saw blade guard or the safety baffle. The operating table must be stable, and there should be sufficient lighting for night operations.

3. Turn on the main switch, try a few turns without load, and allow it to start after confirming safety.

2. At work

1. Operation with gloves is strictly prohibited. If dust is caused during operation, wear a mask or face shield.

2. Do not try to cut small unclamped workpieces.

4. This cutting machine only allows cutting profiles.

5. Do not perform strong cutting operations, and make the motor reach full speed before cutting.

6. No one is allowed to stand behind the saw.

7. Do not lean over or bypass the saw, and do not loose any hand or raise your arm from the saw or workpiece when the saw blade is not stopped.

8. Do not operate when the guard is not in place, and do not put your hands within 15 cm of the saw blade.

9. Before repairing or replacing parts, you must cut off the power and wait for the saw blade to stop completely.

10. If abnormal sound is found, the inspection should be stopped immediately.

3. After work

1. Turn off the main power

2. Clean and tidy up the workbench and venue

4. In the event of personal or equipment accidents, keep the scene and report to relevant departments.