Cause And Treatment Of Laser Sheet Metal Cutting Machine Burr

In order to meet the needs of customers for cutting metal pipe and sheet, IGOLDENCNC Laser launched the Metal Cutting Machine (Model:PE-F3015). This laser sheet metal cutting machine is adopted the Taiwan famous screw guide, Panasonic servo and drive, the cutting machine can improve the working efficiency greatly. And the laser sheet metal cutting machine can up to 200mm (can be customized according to customer needs ). Moreover, the steel laser cutter unique design with rotary auxiliaries can solve the technical problems for cutting pipe and sheet.

The factors and solutions for burrs of laser sheet metal cutting machine

Factors that can cause burrs during metal cutting, such as: output of fiber laser source, cleanliness of focus lens and protect mirror, cutting focus and output of auxiliary cutting gas. 

The solution for removing the burrs as below for your reference 

1). First, ensure the good transmission for  fiber laser power.

- whether the relevant components of the equipment are operating normally .

- whether there is any problem with the output of the fiber laser power .

- whether the mirrors in the laser transmission process is dirty.

- whether the focus lens is dirty.

- whether the mirrors or lens has small cracks that are not easily visible to the eye.

2). Appropriate setting for laser sheet metal cutting machine power

Different thickness metal material need different cutting power, If the cutting power set high, the cutting gap will be big .Otherwise ,if the power is small not enough caused the material will not be cut through and have burrs at back side.

3). Auxiliary cutting gas output pressure setting

When the laser steel cutting machine is working, the auxiliary gas can quickly cool the heated area, and the cutting slag is blown away in time, so the output pressure of auxiliary gas will affect the cutting effect.

Moreover, the purity of the auxiliary gas also has certain requirements, and the higher the purity, the better cutting effect.

laser cutter metal Parameters

Features of laser sheet metal cutting machine:

1.Ultra-low cost, lasers consume only 0.5-3 degrees per hour; Air can be used to cut various metal sheets.

2. Imported original laser generator, stable performance, the service life is up to more than 100 thousand hours.

3. Our 3d fiber laser cutting machine has high speed, high efficiency, the speed for thin plate can up to tens of meters per minute

4. Maintenance-free laser.

5. Cutting edge quality is good deformation is small, appearance is smooth and beautiful.

6. Adopting imported guiding mechanism and servo motor, the cutting precision is high.

7. laser cutter cutting machine can design various graphics or characters at any time, and it is easy to cut and operate.

8. Intelligent automatic oiling device greatly improves the service life of transmis-sion parts.

9. The guide ralls and teeth are calibrated with a precision collimator, and accuracy is +-0.01.

10. Using the Japanese intelligent gas group design, can automatically adjust pressure, automatic ventilation, pressure detection.

11. The perfect fiber laser cutting machine cnc is tempered at high temperature, the internal stress is eliminated with the furnace cooling, 

and the imported gantry milling finishing, ensure normal use of 20 years without deformation.