China Fiber Laser Cutter Fiber Laser Metal Cutting Machine

In today's commercial information age, consumers can learn a lot of useful product information through the Internet, and they can also query the industry rankings of Fiber Laser Cutter manufacturers through the Internet, which greatly reduces the situation that consumers are deceived because of information asymmetry. With the development of the times, when consumers buy high-tech products such as Fiber Laser Cutter, they will conduct strict comparisons in terms of product quality, product prices, after-sales service, etc, and their buying behavior is becoming more and more rational.

Fiber Laser Cutter is a new type of laser cutting equipment. Its working principle is that a high-energy laser beam irradiates the surface of the workpiece to make the workpiece reach the melting point or boiling point, while the high-pressure gas blows away the molten or vaporized metal. As the relative position of the beam and the workpiece moves, the material will eventually form a slit, so as to achieve the purpose of cutting.

Fiber Laser Metal Cutting Machine Structure

The main components of Fiber Laser Metal Cutting Machine host part, control system, laser, chiller, requlator and so on.Most of the above parts have their own manual or operating instructions, the main machine, structure and composition of the electrical control svstem will be elaborated here.

Main Advantages of Fiber Laser Metal Cutting Machine

Fiber laser has higher energy conversion rate that can reach up to 30%, saving operation and maintenance cost.

Laser cutting machine are design with semiconductor modular and redundancy, and there is no optical lens in resonant cavity. So no need to spend much time starting and adjusting the machine before cutting work, which is incomparable among traditional laser machines.

Protective lens is configure in fiber laser head to protect focus lens and reduce parts consumption.

Laser head won’t touch the materials directly so as not to scratch the materials and ensure quality cutting effect.

Fiber laser produces the smallest kerf and thermal area, which keeps the cutting stability and avoid deformation of the material.

0.2mm/min cutting accuracy and fast cutting speed markedly increases the work efficiency of metal parts manufacturing.

Fiber laser cutting machine works in a safe and environmentally friendly way. Little pollution and noise will produce and workshop environment is well protect.

Fiber Laser Cutter host part

The machine host part of the laser cutting machine is the most important part of the Fiber Laser Cutter. The cutting function and cutting accuracy are achieved by the host part

The host part includina 6 parts:the bed, laser, gantry part, Z axis device, auxiliary parts of the working table (protective cover, air, and water channel), the operation panel. 

Electrical control part:

The electrical control svstem of the laser cutting machine is the main part to ensure that a variety of graphics trajectory. Generally, the electrical control system mainly composed of the numerical control system and low voltage electrical system. 

The Fiber Laser Cutter is equipped with CYPCUT software, and this system is based on WINDOWS XP operating platform, stable and reliable operation, including 32-bit microprocessor, ethernet communication interface. 

The svstem featured fast interpolation operation speed, easy to operate, good dynamic performance, strong load capacity

The control part of the low-voltage electrical system is located in the electric control cabinet. which is the interface part of the electrical controThe components of the electrical part adopt world well-known brand to ensure the stable running and sensitive response. 

Drive motor is the AC servo motor, which used for driving the X-axis gantry, Y-axis skateboard of the laser cutter. 

Machine Parameters