Publish Time: 2021-10-18 Origin: Site
The cnc pipe cutter is designed to be a comprehensive cnc tube cutting machine solution. With a wide range of features and capabilities, this tube cutting laser system is designed to allow users a great degree of tube forming flexibility.
1. Oil screen
cnc tube cutting machine processing oil screen accuracy: screen wall thickness ≤ 20mm, slit width ≥ 0.15mm, slit cross-sections are rectangular, trapezoidal and various special-shaped holes. The types of slits include parallel, staggered, spiral, etc., and the center of the hole The distance error is 0.01-0.02 mm, the positioning accuracy of the density laser beam is ±0.03mm, the repeatability is ±0.01mm, and the surface cutting finish is 6.3.
2. Lighting lamps
The common styles of metal lamp covers are hollow carved patterns, and even more complicated patterns. The cnc tube cutting machine has high efficiency in processing the lamp housing, the pattern is clear and does not deform, and no secondary processing is required, which greatly reduces the production cost.
3. Automobile exhaust pipes
As a high-end consumer product, the production process of the product is the main breakthrough point in order to enhance the value of the product. The cnc tube cutting machine for tube steel processes automobile exhaust pipes without burrs, the inner tube wall is smooth, and the processing speed is fast. It is a good choice for batch processing.
Start-up sequence of cnc pipe cutter
1. Check whether there are any items in the operating range of the machine tool that affects the safe operation of the machine tool.
2. Turn on the main power switch of the fiber laser cutting machine and the control power switch of each branch.
3. Turn on the voltage stabilizer and check whether it is operating normally.
4. Turn on the power switch of the fiber laser and let the fiber laser with its own air conditioner or internal desuperheater run for more than 30 minutes.
5. When the fiber laser is running for 20 minutes, turn on the air compressor to check whether the air compressor is operating normally.
6. Open the air circuit control valve, turn on the refrigeration dryer, check whether the refrigeration dryer is operating normally, and check whether the air pressure is normal.
7. Open the cutting auxiliary gas control valve according to the cutting needs, and check whether the cutting auxiliary gas pressure is normal.
8. Turn on the power switch of the machine tool and press the power on button to start the machine tool control system. After the control system starts normally, the machine tool returns to the origin.
9. After the fiber laser has been running for more than 30 minutes, turn on the chiller to run, and check whether the chiller is operating normally.
10. After the actual temperature of the high and low-temperature water of the chiller reaches the set temperature ±1℃, the fiber laser will be applied with high voltage, and check whether the fiber laser is operating normally.
11. Turn on the exhaust fan or dust collector, check whether the operation of the exhaust fan or dust collector is normal, and the fiber laser cutting machine enters the state to be cut.