Publish Time: 2021-11-16 Origin: Site
This model is laser metal marking machine adopts most advanced Germany technology. And the fiber lasers are of exceptional quality and can last up to 8-10 years without consumables and any maintenance .
If you have a high demand for fiber laser beams, then this fiber laser engraving machine will definitely be your choice.
According to its many features, people also call it fiber laser engraving machine, metal laser engraving machine, metal laser marking machine, laser metal engraving machine, laser engraving machine metal.
1. First, the light path is moving, but the laser marking machine equipment is not broken, just adjust the light path;
2. The second is that the power module is broken, or the focal position of the laser focus is incorrect;
3. If the red light disappears suddenly, the reason may be that the red light thread end of the laser marking machine is broken, or the red light socket is loose and misplaced, the red line module is broken, or the red light pen is broken, in short There are many reasons for this problem.
The red light debugging method of laser marking machine is as follows:
1. The position where the red light increases is after the laser emits light, that is, before the beam expander.
2. It is the best effect to ensure that the red light can pass through the beam expander, and the light spot that reaches the focal plane after the field lens is the smallest.
3. Adjust the position of the red light so that the red light can reach the center of the X vibration lens of the marking head galvanometer, and then fix the red light.
4. Re-calibrate the laser and beam expander.
5. Re-calibrate the red light and the content of step 3 above.
6. Generally, the red light adjustment is set on the marking software, and it can be turned on by pressing F1
If you find that the galvanometer is moving and there is no red light coming out, first check to see if the mechanical switch to control the red light is not turned on, and to see if the power of the red light is turned on. Use a multimeter to measure the two red and black bars of the red light indicator. Is there a 5V voltage in between, if it is 5V and there is no laser output, then the red light indicator needs to be replaced.
Main Feature of laser metal marking machine:
1. Laser power output is stable, and light spot quality is good. Ultrahigh accuracy and fineness, with resolution up to 2540dpi.
2. Quick marking and cutting speed at 2-3 times that of traditional machines.
3. There is no restriction in operation system. It is convenient in operation, with fully closed light paths, so it is stable, reliable and free in maintenance with ultra-long service life up to more than 100,000 hours.
4. No pollution, no noise, and no consumable materials. High elector-optical conversion efficiency. The gross power consumption is 500W, which is a tenth of lamp pumped solid laser marking machine, so can greatly save energy.
5. No need any maintenance, long life, small volume, suit for working in atrocious working conditions.
6. Powerful marking software. It is compatible with file generate from CorelDraw, AutoCAD, Photoshop,
etc; support PLT, PCX, DXF, BMP format; SHX, TTF font can be used directly; it also supports automatically coding, printing serial number, batch number, date, bar code, 2D bar code, number jumping automatically, etc.