How To Maintain The Tube Laser Cutting Machine

The worthwhile Tube laser cutting machine: the TruLaser Tube 3000 fiber is economical even when it is not being fully utilized. Thanks to its reliability and easy of operation, it is perfect for first-time users or as a supplementary machine.

1. The cooling system should be grounded, the water tank and water circuit should be cleaned frequently, and the temperature control point of the refrigeration temperature control water tank should be appropriate, otherwise the laser tube will be damaged and condensed, and the power will drop. The cold water head falls off, the service life is greatly shortened, and sometimes it cannot work, resulting in continuous pipe replacement.

2. The installation fulcrum of the laser tube of the Tube laser cutting machine should be reasonable, and the fulcrum should be at 1/4 of the total length of the laser tube, otherwise the spot pattern of the laser tube will become worse, and sometimes the spot will become several points within a period of time, resulting in The laser power drop does not meet the requirements.

3. The Tube laser cutting machine should be checked frequently to clean the waterproof device. Cooling water often cannot be washed with boiling water to protect the float switch or the float switch of the water protection from resetting, so the short-circuit method cannot be used to solve the problem.

4. The suction device should be inspected and cleaned regularly, and the air duct should be cleaned. Otherwise, a large amount of smoke and dust cannot be discharged, and it will quickly contaminate the lens and laser tube, making the mechanical and electronic parts prone to oxidation, resulting in poor contact.

5. Check the focus lens and mirror surface. After a period of time, the lens frame will become hot and the surface of the lens will become discolored and rusty; peeling cracks are objects that need to be replaced, especially when many customers use air pumps and air compressors to cause water accumulation in the focus lens. Regularly ensure the cleanliness and quality of the lens in the optical path system.

6. The working environment of the laser pipe cutting machine should not be too bad. The ambient temperature is higher than 30 degrees and lower than 18 degrees, there is too much dust, air pollution is serious, the machine is damaged, and the failure rate continues to rise; in a humid environment, all electrical accessories are prone to failure.

7. The power of the grid must be matched.

8. The working current of the laser tube should be reasonable, and it cannot work at full power for a long time; use the laser reasonably to save laser energy; the optical system should be cleaned regularly, otherwise the laser tube will age and break prematurely. When the laser tube cutting machine is working, the power should be adjusted to 50-60% of the total power, and then adjust the working speed according to the material to make the laser tube reach the working state.

Laser cutting machineWorking Processes:

Automatic Tube Bundle Loading

Automatic Material Alignment

Automatic Feeding and Rotation

Fiber Laser Tube Cutting

Unloading

Tube Laser Cutting Machine  It is suitable for cutting carbon steel, stainless steel, aluminum, brass and alloy metal materials

Take the oil industry for example, the main route of oil transport is the pipeline, and because of the characteristics of the oil itself, leading to the high quality requirements of the pipeline. While fiber laser cutting machine can achieve the pipes multi-angle precision processing to fulfil the oil transportation requirement.

Tube laser cutting machine meets the parts processing requirements of most industries, working accuracy is stable. At present, laser cutting machines have been widely used in electronics, electrical, mechanical hardware, new energy lithium, packaging, solar, LED, automotive and other industries.