Publish Time: 2021-10-15 Origin: Site
laser cutter metal means that a high-energy laser beam irradiates the surface of the workpiece to make the workpiece reach the melting point or boiling point, while the high-pressure gas blows away the molten or vaporized metal. As the relative position of the laser beam and the workpiece moves, the material will eventually form a slit to achieve the purpose of cutting.
With the continuous transformation and upgrading of cutting technology, the problems of slow perforation speed, small cutting thickness, non-smooth cutting section, and unstable production of the whole board faced by traditional cutting processes have been solved. Long-term stable operation of the equipment has been achieved, and the economic benefits of the manufacturer have been greatly improved. The research and development of laser cutting technology is designed to improve the quality of product processing and meet the needs of sheet metal processing in various industries. According to the differences in the processing width, thickness, and processing complexity of the sheet, it forms common edge cutting, high power cutting, and bright Leading processing technologies such as face cutting and high-pressure air cutting have enabled metal cutting machines to occupy a leading position in the sheet metal cutting market
Firstly,Comparison between the manual laser head and auto focus laser head.
For Manual laser cutting head,if the different thickness,then the focal length will be different.Then you need to adjust the focus,so that means,if you change the different thickness of stainless steel to cut.Then you need adjust the focus for every time,that will waste some time.
And the manual laser cutting head,if cut 5mm and 6mm stainless steel,the cutting time is longer.
For auto-focus laser cutting head,it has a built-in motor drive unit.Which drives the focusing lens through a linear mechanism to change position automatically within 17mm. Customers can set the program to achieve continuous focus that completing the rapid piercing and cutting material with different thickness.
The laser head has focus lens inside it, every focus lens have the focal length.If you find the correct focal length,then the laser power will be the strongest,and the cutting effect will be the best.
For manual laser head,that means,if you change the different thickness of the material,then you need to adjust the height of the laser head to find the correct focal length.And then you need to turn round the focus platform by your hand.
For auto focus laser head,that means,for the first time cutting,you need to find the focus ,then for any future cutting,the laser head will sense the thickness.And the motor move the laser head to up and down,to adjust the height by electric,not by manual.
Auto focus laser cutting head
Usually if your machine laser power is below 1500w,manual laser head is enough.
From 1500w, we will set one auto focus laser head to customers.That will help you to get a fast cutting.
If you also want a auto focus laser head for 1000w,750w and 500w. That is also no problem.
fiber laser cutting Parameters
| Model | iGR-FT 3015 | |
| Working area/ Tube length | 3000*1500mm/ 6000mm | |
| X axis stroke | 1500mm | |
| Y axis stroke | 3000mm | |
| Z axis stroke | 300mm | |
| Tube diameter | 20-220mm | |
| Accuracy | X, Y axis positioning accuracy | 0.05mm |
| X, Y axis repositioning accuracy | 0.03mm | |
| Speed | W axis rotate angle | n*360 |
| W axis max. ratate speed | 80rpm | |
| X, Y axis max. running speed | 150m/min | |
| U axis max. positioning speed | 800mm/s | |
| X, Y axis max. accelerated speed | 1.5G | |
| Power supply | Phase | 3 |
| Nominal voltage | 380V | |
| Frequency | 50/60Hz | |
| Protection grade | IP65 | |
| Machine body | Max. working loading | 1000kg |
| Body weight | 2600kg | |
| Size(L*W*H) | 8060*3000*1965mm | |
| Laser power | 500w/ 750w/ 1000w/ 1500w/ 2000w/ 3000w/ 4000w/ 5000w/ 6000w/ 8000w/ 10000w/ 12000w | |
| Worktable optional | 4000*1500mm/ 4000*2000mm/ 6000*2000mm/ 6000*2500mm | |
| Tube length optional | 3000mm/ 9000mm | |
Our advantage of laser cutter metal:
(1). High rigidity heavy chassis, reducing the vibration generated during the high-speed cutting process.
(2). Gantry double-drive structure,with imported Germany rack & gear transmission system, which improves the production efficiency.
(3). High-performance cast aluminium guide rail, after infinite aalysis ,which accelerates the cicular arc cutting speed.
(4). High precision, fast speed, narrow slit, minimum heat affected zone, smooth cut surface and no burr.
(5). The laser cutting head does not come into contact with the surface of the material and does not scratch the workpiece.
(6). The slit is the narrowest, the heat affected zone is the smallest, the local deformation of the workpiece is very small, and there is no mechanical deformation.
(7). It has good processing flexibility, can process any pattern, and can cut pipes and other profiles.
(8). Non-deformable cutting can be performed on materials of any hardness such as steel plates, stainless steel, aluminum alloy plates, and hard alloys