Maintenance Methods Of Metal Laser Marking Machine Accessories

Metal laser marking machine uses optical fiber laser to output laser and realizes marking function through high speed scanning galvanometer system. The optical fiber laser marker

features high electro optic conversion efficiency, air cooling, small size, high quality output

beam, high reliability, long service life and energy saving.

In order to make the metal laser marking machine have a longer use time, the operator needs to pay attention to the maintenance of the laser machine accessories in the usual marking work, so as to increase the service life of the fiber laser marking machie, save costs, and create greater benefits. This post will share some maintenance methods of laser marking machine accessories.

Field lens of metal laser marking machine:

The field lens of the mini cnc laser marking machine needs to be cleaned frequently on time. Because it is outside and there will be dust when marking, there is a layer of dust on the lens if it is not cleaned for a long time, and it will harm the light quality of the laser marking machine. In more serious cases, it may damage the lens.

Galvanometer of laser marking machine

If the galvanometer of the laser marking machine does not move, or does not move in one direction, it is necessary to check whether the XY status indicator of the galvanometer is normal, check whether the wiring of the galvanometer is loose, check whether the switch power supply of the galvanometer is normal, and check whether the output signal of the USB board galvanometer is normal.

The galvanometer should avoid getting close to objects with strong magnetism, strong electricity, and strong seismic current, and avoid touching the galvanometer with hands and objects. If the lens is dusty, you can use a rag and a small amount of alcohol to clean it, paying attention to wipe it in one direction.

Fan cleaning of laser marking machine

Long-term use of the fan will accumulate a lot of solid dust in the fan, causing the fan to generate a lot of noise, and it is not conducive to exhaust and deodorization. Therefore, the fan must be cleaned regularly to ensure the normal use of the machine.

Laser marking machine

Reflective lens of laser marking machine

There will be a reflective lens on the CNC marking machine. This lens will cause certain damage as the use time increases, so this lens must be replaced regularly, otherwise it will affect the use of the laser marking machine.

Chiller alarm

If it is found that the laser chiller alarms, the laser marking machine cannot be used, because the laser power supply cannot be started under the alarm condition.

The alarms of the laser chiller are mainly flow alarm and compressor high pressure alarm. When an alarm occurs, we should first check whether the chiller of the laser marking machine has water pressure, mainly to check whether the water outlet pressure of the chiller is normal. If there is no flow, then it may The water pump of the chiller is broken or the pressure is not enough. On the contrary, the flow switch of the chiller is damaged. The fault needs to be repaired and dealt with according to the actual situation.

Fiber laser marking machie Application

Fiber laser marking machine is used to mark on both metal and nonmetallic materials. The specific applicable materials are as follows:

A. Metal materials: Stainless steel, carbon steel copper, aluminum alloy,etc.

B. Nonmetallic materials: synthetic materials, rubber, leather, hard plastic, the material with black film,etc.

Fiber laser marking machie applicable lndustries:

Metal Case: hardware tools, medical equipment, plumbing equipment, hard alloy, measuring tools, machine parts, instruments, kitchen appliances, gear bearings, valve, vehicle accessories, pens, thermos cups, auto and motorcycle accessories, etc.

Nonmetal Case: Concrete, Capacitors, inductors, printed circuit boards, integrated circuits, computer keyboards, electrical plug-in cards, electrical appliances, upvc profile, etc.