Wood Board Cutting Machine CNC For Cutting Wood

In recent years, more and more furniture companies use woodworking engraving machines to cut panel furniture. The wood board cutting machine is low in price and flexible in function. It can cut not only straight lines, but also arbitrary complex curves, realizing the integration of punching, grooving and cutting. Panel furniture wood board cutting machine is mainly used for cutting and perforating panels. Usually, the machine must work more than ten hours a day, therefore, the daily maintenance of the machine will have an important impact on the service life of the machine.

First Section:

CNC for cutting wood Electric Box Use a vacuum cleaner or air gun to clean up the dust inside the electric box (Note: Be sure to cut off the power, wait until the inverter has no display and the main circuit power indicator goes out before proceeding, such as using an air gun to drain the water in the air pipe first); check the electrical Components, check, and tighten the connection terminals. After cleaning, put the desiccant in the cabinet.

Second Section: wood board cutting machine Mechanical Transmission After cleaning the dust and impurities on the machine screw, rack and guide rail, brush the rack and guide rail with lubricating oil with a brush (use machine guide rail oil ISO VG-32 ~ 68 mechanical oil, but grease is forbidden) The rail racks have oil, press the oiler oiling button manually to let the lubricant enter each slider.

Third Section: wood board cutting machine Spindle and Drilling Bank

1. Drilling Bank: clean the surface impurities, and then inject 5cc of lubricating oil (Krupp nb52) from the filler port, and run for 5 minutes after adding.

2. Spindle and Tool Holder: The tool holder on the spindle should be removed, and the taper hole of the spindle should be cleaned with a clean cloth. A little oil rubbed on the handle of the knife. Fourth Section: wood board cutting machine Tools The tools need to be removed and cleaned up, protected against rust, wiped with a little oil on the knives, and arranged properly.

3、Fifth Section: wood board cutting machineAccessories 1. Vacuum Pump: The user of the water-cooling vacuum pump puts the water of the vacuum pump clean, the sediment inside the water tank is cleaned with clean water, and the air-cooling vacuum pump cleans the filter element.2. Vacuum Cleaner: Clean the dust and impurities from the suction port.3. Oil-Water Separator: Drain the water from the oil-water separator in the bed.

he Parameter

Wood board cutting machine applicable materials:

Woodworking, Acrylic Board, Article Stone, Organic Glass, Soft metals etc.