Publish Time: 2022-02-18 Origin: Site
CNC router 4th axis are majorly used for 3D Mould Working. It is very suitable for making deep foam, plastic, stone, wood mold works. Surely also can widely use for flat materials such as flat stone, wood, aluminum, copper, PVC and other hard and soft materials.
1. The Cnc 4th axis Wood usually runs continuously for less than 10 hours a day to ensure the cleanliness of the cooling water and the normal operation of the water pump. The water spindle motor should not run out of water. Change the cooling water regularly to prevent the water temperature from becoming too high. If the working environment temperature in winter is too low, the water in the aquarium can be replaced with antifreeze.
2. Whenever you use the machine, pay attention to cleaning and be sure to clean the platform and transmission system of dust. Also, lubricate the transmission system (X, Y, Z 3 axes) regularly (weekly). (Note: The polishing rods of the three rods X, Y and Z are maintained by motor oil. High speed butter is added to the screw parts. If winter working environment temperature is too low, screw rod and The polishing rods (square or circular rails) must be cleaned with gasoline Clean and then add oil, otherwise excessive resistance will be created in the transmission part of the machine and the machine will be misaligned. )
3. When performing maintenance and inspection of electrical appliances, be sure to turn off the power after the monitor display is turned off and the main circuit power indicator light is off.
4. Inspect the fasteners of the engraving machine after about 3 months and tighten the connecting screws on both sides of the gantry, the tightening screws of the screw nuts, and the tightening screws of the motors on both sides.
Product Parameter:
| Model | 2130 ATC CNC Router |
| Working area | 2100*3000mm |
| Spindle | ATC 9KW HQD air cooling spindle, rotate 180 degree |
| Inverter | Fuling |
| Motor | Dorna servo motors |
| Driver | Dorna servo driver |
| control System | NK280 control system |
| Table | Vacuum & T-slot table with air cooling pump |
| Oil lubrication | Automatic lubrication |
| Limit | Omron limit |
| Transmission | XY axis helical rack Z axis Taiwan ball screw |
| Rail | X,Y,Z axis Taiwan HIWIN 25 Square guide rail |
| Screw | Z axis TBI 3210 ball screw |
| Bed | Thick steel welded big square tube |
| Gangry | Strong frame |
| Pillars | Steel pillar（Suitable for high-end customers） |
| Cabinet | Independent cabinet |
| Voltage | 3 phase/380V |
| Color | As requirement |
| Tools | 1 box(10 pieces) |
| Rotary axis | Optional |
cnc router 4th axis Features :
1.The 4 axis CNC machines’ body is strong, rigid, high precision, reliable and durable.
2.High precision ball screw and Taiwan Hiwin square guide rails, which move smoothly to ensure machining precision.
3 4 axis rotary system with servo motor and driver .
4. Break point specific memory, power outages continued carving, processing time forecast, and other functions to ensure that accidental processing.
Application
Wood, stone, Polyamide foam, as well as a variety of non-metallic materials, engraving a variety of small and medium-sized non-metallic molds, special shape workpieces and other products of precision production.