1000w Rust Cleaning Laser Fiber Laser Cleaner

1000w rust cleaning laser is the procedure in which debris or impurities such as carbon, silicon, and rubber are removed from the surface with the help of laser radiation. The laser cleaning device is mainly used for cleaning high-value parts in the industrial field, including rust removal, paint removal and grease removal on the surface of carbon steel plate, rust removal and paint removal on the weld, oxide layer on the surface of aluminum alloy, and removal of rubber residue and grease scale on the surface of die.

The advantage of fiber laser cleaner is that the clean speed is fast and the clean head is light. High cost performance。

If you have low requirements for laser cleaning and only remove rust or thin paint of stainless steel , mild steel and iron, laser cleaning machine can meet the requirements.

laser cleaning machine power support 1000W 1500W 2000W , the laser source you can choose Igoldencnc

Light weight handheld design provides mobility for users and makes it easier to clean tricky angle and amorphous shape workpieces.

Working Principle of 1000w rust cleaning laser:

The working principle of laser cleaning is complex, which may contain both physical processes and chemical processes. In most cases, it is dominated by the physical one.

When the high-energy laser irradiates on the material surface, the surface absorbs laser energy from the surface to the internal substrate. At the same time, the surface temperature rises rapidly and reaches its vaporization point so that the contaminants are vaporized from the material surface.

This selective vaporization usually occurs when the laser beam absorption rate of the contaminants on the surface is significantly higher than the one on the substrates. One typical application case is the cleaning of dirt on the stone surface. The contaminant on the stone surface has a high absorption rate of the laser and is quickly vaporized. When the contaminants are cleaned, the absorption rate to the stone surface is very low.

Most of the laser energy is scattered to the contaminant on the stone surface, and the temperature change of the stone surface is very small. Therefore the stone surface is thus protected from damage while the contaminants are removed.

Maxwave Laser rust removal machine is with portable laser gun.

The laser cleaning machine is a new generation of high-tech product for surface cleaning. It’s very easy to install and operation. It could be used with no chemical reagents,no media, dust-free and anhydrous cleaning, with the advantages of auto focus, fit crank surface cleaning, high surface cleanliness. The laser cleaning machine can clear the surface resin, oil, dirt, dirt, rust, coating, coating, paint, etc.