Publish Time: 2022-06-07 Origin: Site
This automatic granite cutting machine is a very mature with accurate and stable performance.. It adopts PLC control system, touch screen operation panel, and flexible HMI, plus an infrared laser to mark the cutting position.The main electrical components in control cabinet are international famous brands.
1. Turn off the main power
2. Clean and tidy up the workbench and venue
Circumferential spring staggered anti-backlash structure of double-piece CNC stone cutting machine, two thin desktop stone cutting machines are set together, each desktop stone cutting machine has two circumferential channels, and a short column is installed on the end of the granite cutting machine , Used to install the spring. When assembling, make the spring have enough tension, so that the left and right sides of the two thin table stone cutting machines are tightly attached to the left and right sides of the wide table stone cutting machine to eliminate the gap between the tooth sides.
There are two ways to support the ball screw of the automatic granite cutting machine on the worktable. One is the form of single support; the other is the form of support at both ends. The table-top stone cutting machine clamps the outer ring of a pair of tapered roller bearings and preloads it to improve the rotation accuracy of the bearing, increase the rigidity of the bearing device, and reduce the vibration of the bearing when the machine is working. The functions of the main pins are as follows:
①Control line-the selection end of the device. Although there is 4K FLASH in 89C51, in order to facilitate wiring and storage of various programs, internal program memory is not used, so it is grounded to read instructions from external program memory.
②——The strobing end of the desktop stone cutting machine is used to read the external data storage separately.
④RESET——reset terminal, when the input reset signal continues to high level for more than two cycles, the desktop stone cutting machine completes the reset initialization operation.
③ALE——Address latch control terminal. When the system is expanded, ALE controls the low eight-bit address output by the P0 port and sends it to the latch for storage to achieve data and address isolation. In addition, ALE outputs positive pulses at a fixed frequency of 1/6 crystal oscillator, which can be used as an external clock or timing pulse.
5 Axis Cnc Bridge Saw Machine Function:
1. The machine head can swing at any angle and can cut the plate at any angle and shape: horizontal cutting, longitudinal cutting, arc cutting, elliptical cutting, and round cutting. The machine can also be used for bump edging.
2. In addition to the cutting shape, it can also cut the large plate with 45° chamfering, opening the basin hole, stove hole, and diagonal cutting
3. The platform can be turned by 85°, which is convenient for loading and unloading.
4. No complicated operations, just input data on the control system
Infrared bridge stone cutting machine is the main machine for stone cutting and processing. It is suitable for cutting and processing of granite and marble plates.It is an essential machine for the stone industry.Infrared bridge stone cutter movements are controlled by computers and can be fully automated.The machine parts are made of excellent grade steel. The four guide pillars are used for lifting and the electronic control part is assembled with advanced imported electrical components.The equipment uses a PLC control system, a good inverter speed control, infrared knife set, touch-operated system.The automatic control of the computer ensures the accuracy of cutting. Therefore, the device has the advantages of high stability, high efficiency, and easy operation.