Common Faults Of CNC Wood Cutter Machine

In the process of using the CNC wood cutter machine , we will encounter various problems,so everyone knows What are the common faults, fault judgment methods and solutions of the cutting machine? 

1. Deal with over-limit

Reason: This situation is usually caused by the value of "Physical Coordinate Position" and "Replacement Processing File Size" of the processing zero point exceeding the maximum or minimum value set by "Soft Limit".

Judgment method: After the user defines the machining zero point, the machining starts, and the X-axis or Y-axis exceeds the limit in a certain direction.

Solution: re-select the appropriate processing zero point.

Two, handle abnormal interruption

Reason: The restricted area set by the user is smaller than the actual machining area of the machine tool.

Judgment method: The system can start processing normally, and abnormal interruption occurs after processing for a period of time.

Solution: The restricted area is larger than the actual processing area of the machine tool.

Three, power off

Reason: voltage fluctuations.

Judgment method: The screen prompts normal, but when the value stops changing, pressing any key has no effect; the screen prompts "Enter the power-off protection state, it may be that your power-off protection does not match the voltage." Panic occurs during manual exercise; during manual operation , The screen displays "entering the power-off protection state, it may be that your power-off protection does not match the voltage"; the current operation status is displayed on the prompt screen, and any key is invalid.

Solution: This situation usually occurs when the voltage fluctuates, similar to the situation of power outage protection. Only when the voltage fluctuation is small, there will be a screen prompt, but when the voltage fluctuation is too large, the screen cannot be displayed due to the reset circuit of the power management chip in the control card. After adjusting the operating voltage of the control card to 5.3V, the above situation can basically be solved

(1)Advanced Control System:

Mach3 or Advanced Taiwan Syntec numerical control system and large liquid crystal display brings out much convenient operation and simpler maintenance.

(2)Powerful Compatibility:

Internationalized directives ensure that it is compatible with CAD / CAM software like type3/ artcam/ castmate/ proe/ UG/ Artcut etc, home and abroad.

(3)Heavy duty :

Strong gantry and heavy duty design, ensure the machine stability when working ,

machine net weight around 1100KG.

Main advantages of CNC wood cutter machine :

Without a doubt, CNC routers brought us a great favor to finish our projects faster than before. Besides this benefit, there are three main advantages of using a cnc wood cutting machine. They are,

Precision Cutting: Machine language is the most accurate. Human-held cutting surely will have defects. But a machine can not make mistakes. Therefore, precision cutting is the best advantage of the CNC routers.

Different Materials: Using the CNC routers, we can process various materials other than wood. We have already mentioned the name of the materials.

Flexibility and adaptability: Using a cnc wood cutting machine is more flexible because we can easily change the target object according to our desire. Besides, we can simply input the design on the computer and get our results on the machine.

Decreases the Labor cost: Surely, to operate a cnc wood cutting machine no need for laborers because we can smoothly perform all the tasks without any help.