Publish Time: 2021-12-21 Origin: Site
Metal fiber laser cutting machine is a machine that is used for precise metal cutting. This machine is mechanized by a fiber laser. The quality and capacity of the beam coming out of the fiber determine the speed of cutting. Higher the quality of the beam, more is the speed and precise the cut. What’s good with this machine is that the work produced by this machine, i.e., the cuts is accurate and explicit in comparison to some other cutting machines.
●High efficiency: high-speed digital motion control by Germany technology system, especially for high-speed, high-precision laser cutting.
●Integrated design: a 10% reduction of the volume of space, easier and cheaper for ocean and inland transportation.
●Stable running: adopting gantry structure with synchronous bilateral gear and rack drive, and high-strength aluminum beams enhance its stability.
●Low energy consumption: Photoelectric conversion rates as high as 25-30% which can save energy and power. Electric power consumption for this type fiber cutting machine is only about 20%-30% of the traditional Co2 laser cutting machine.
●High technology:full application of laser technology, mechanical technology, numerical control technology and other advanced technology.
●Low maintenance cost: 500w fiber laser cutting machines doesn't need reflect lens, saving much maintenance cost. The key components lifespan can reach 100,000 hours with stable performance;
Fiber Laser Cutter Structure
The main components of metal fiber laser cutting machine are machine host part, control system, laser, chiller, requlator and so on.Most of the above parts have their own manual or operating instructions, the main machine, structure ano composition of the electrical control system will be elaborated here.
Machine host part:The machine host part of the laser cutting machine is the most important part of the laser cutting machine.The cutting function and cutting accuracy are achieved by the host part.The host part includina 6 parts:he bed, laser, gantry part, Z axis device, auxiliary parts of the working table (protective cover, air, and water channel), the operation panelElectrical control partThe electrical control system of the laser cutting machine is the main part to ensure that a variety of graphics trajectory.
Electrical control part:The electrical control system of the laser cutting machine is the main part to ensure that a variety of graphics trajectory. Generally, the electrical control system mainly composed of the numerical control system and low voltage electrical system. The laser cutting machine is equipped with CYPCUT software, and this system is based on WINDOWS XP operating platform, stable and reliable operation, including 32-bit microprocessor, ethernet communication interface. The system featured fast interpolation operation speed, easy to operate, good dynamic performance, strong load capacity. The control part of the low-voltage electrical system is located in the electric control cabinet, which is the interface part of the electrical control.
The components of the electrical part adopt world well-known brand to ensure the stable running and sensitive responseDrive motor is the AC servo motor, which used for driving the X-axis gantry, Y-axis skateboard of the laser cutter.It characterized by good accelerated performance, fast response.The maximum positioning speed is up to 50m/ minThe Z-axis of the laser cutting machine is the feed axis. which uses AC servo motor for drivingThe Z-axis cutting head, characterized by the good dynamic response, that is, can be controlled by both servo and NC control.