Fiber Laser Cutter Laser Sheet Cutting Machine Laser Iron Cutting Machine

It is necessary to have effective fiber laser cutter to do good work. Perfect laser sheet cutting machine series represent typical good processing performance.

500w laser iron cutting machine is dual-drive mobile gantry structure with linear guide and gear rack drive system. Professional laser cutting CNC system ensures high integration, precise control and stable operation.

The Fiber Cutting Machine adopts Fiber laser technology in Germany and the United States original fiber laser cutting head, Perfect Laser's fiber laser cutting machine can provide users with a powerful cutting capacity and efficiency, an ideal choice for 1-5mm thin sheet metal, carbon steel and mild steel processing.

we will briefly discuss the major factors affecting the quality of the cut and how to properly control it.

1.Laser power

The amount of laser power at the time of cutting depends primarily on the nature of the material being cut and the type of cut required. However, in general, it can be concluded that the greater the power, the greater the thickness of the material that can be cut, and the cutting speed and the width of the slit are also increased; the laser power required for different cutting types is gasification cutting>melting cutting>oxygen cutting. Different cutting materials will correspond to the best laser power, and the determination of the best power needs to be judged by actual cutting and observation. In general, if the actual power is greater than the optimal power, then the heat affected zone around the cut will be enlarged, and the sharp corners will even be partially melted, making it look like a rounded shape, thus affecting the cutting effect. . When the actual power is less than the optimal power, the roughness of the lower part of the cutting surface is deteriorated, and the slag is hard and hard to remove.

Since the sputtering state of the spark during the cutting process is directly affected by the flow of the molten metal in the slit, the determination of the optimum laser power can be judged by the spark state of the sputtering during the cutting process. If the power selection is appropriate, the state of the spark should be straight and concentrated, slightly lagging but in the same direction as the cutting direction, slender.

2. Auxiliary gas type and its pressure

The auxiliary gas is usually oxygen, nitrogen, inert gas or compressed air, and the processing quality and capacity are affected by the type of gas. When oxygen is used as an auxiliary gas, the flammability of oxygen improves the cutting speed and improves the cutting ability, but at the same time, an oxide film is formed on the surface of the cutting material due to chemical reaction, which becomes a limitation of oxygen use. When nitrogen or air is used as an auxiliary gas, the back slag can be effectively prevented. In summary, the gas type is different, the cutting effect and speed are different, the oxygen cutting speed is the fastest, the nitrogen cutting effect is the best, and the air cutting cost is the lowest.

3. Focus position

The focus position affects the width of the slit, the slope, the roughness of the cut surface, the sticking state of the slag, and the cutting speed. Only when the laser gets the maximum energy density on the surface of the processed material, the melting range is narrower and can be processed with high precision. Whether the focus is moved up or down, the upper slit of the machined material is widened. The smaller the beam diameter at the focus position and the smaller the focal depth of the short focal length lens, the greater the extent of the upper kerf as a function of the focus position.

4. Related elements of processing materials

When a machining material is processed using a laser cutter, on the one hand, the surface condition of the material affects the stability of the absorption of the laser beam, and on the other hand, the shape of the processing also affects the diffusion of heat.

Material: Different materials have different absorption rates for lasers, so different materials have different cutting adaptability. It should be noted that materials with high reflectivity such as copper and aluminum are not conducive to the formation of spots, so the requirements for the cutting machine are higher.

Thickness: As the thickness of the sheet increases, the required laser power is getting larger and larger, and the cutting speed required is getting lower and lower. When cutting thick plates, if the power is not enough and the cutting speed is too fast, it is not easy to cut through.

Surface state: Surface roughness and surface oxide layer will affect the surface absorption rate to some extent. In general, the flatter the surface of the material, the better the quality of the cut. Therefore, in various places, the material cutting performance can be improved by changing the surface state of the material.

Laser cutting machine's frame part

The bed is made of high-strength cast iron with integrally welded structure, annealed to eliminate casting stress, vibratory stress relief after roughing- semi-finishing - vibratory stress relief-finishingStress reduction is more thorough, reducing the deformation of the machine to ensure that the accuracy for a long timeThrough the numerical control system to control the AC servo motor drive, coaxial drive beam to achieve the reciprocating motion of Y-axis. and achieve rapid movement as well as fast feed movement.The movement stroke of 1500mm * 3000mm.Gear rack and linear quide adopt closed dust-proof device, featured lightweight dust cover and reliable operationGear rack and linear quide are used precision products, effectively quarantee the accuracy of the driveStroke at both ends of the limit switch control, supplemented by both sides of the elastic cushion, effectively ensuring the safety of laser cutting machine's movement.