Publish Time: 2022-01-06 Origin: Site
The cnc machine for stone carving is designed to realize X-Y-Z-A 4-axis linkage with more wider utilization.
It can be used for cutting, chamfering, polishing, slotting, drilling and arc grinding etc. with easy operation and more practicability.
1. Before maintenance and inspection of the stone carving machine, be sure to cut off the power. Only after the monitor has no display and the main circuit power indicator goes out, it can be carried out.
2. It is recommended that the continuous operation time of the cnc stone carving machine be less than 10 hours per day. Ensure the cleanness of cooling water and the normal operation of the water pump. And never allow the spindle motor to lack water. Regularly replace the cooling water to prevent the water temperature from becoming too high. If the working environment temperature is too low, replace the water in the water tank with antifreeze.
3. After each operation of the machine, pay attention to cleaning. Be sure to clean up the dust on the platform and the transmission system. And regularly (preferably every week) lubricate the transmission system (X, Y, Z three axes). Note: X, Y, Z three-axis guide rails are maintained with oil; high-speed butter is added to the screw rods. If the working environment temperature is too low in winter, the screw rods and rails (generally square rails) should be rinsed with gasoline and then cleaned Add engine oil, otherwise the resistance of the transmission part of the machine will be too large and the machine will be misaligned.
Features of cnc machine for stone carving:
-The bed is made of a thick steel pipe and processed in a high temperature way avoid deformation, thus the bed has good rigidity and high strength.
-The machine is equipped with imported square linear guides with high accuracy, can withstand a large load and provides a long service life.
-The table is a water tank with a cooling system. The table surface is coated with an aluminum profile with T- grooves to protective plastic.
-X Y axis use helical gear rack to increase the traction.
-The dust-proof cover is installed on the X, Y, Z axis, which prevents stone chips and cooling water falling onto them.
-High power spindle, long service life, stable operation and strong starting characteristics, high torque, which can provide fast processing and higher efficiency.
-Good electromechanical design, strictly selected tje electrical parts to minimize machine breakdown.
-On the machine, all cables use a special highly flexible cable,and reciprocating motion can reach 10 million times.
-Long warranty time(24 months)
Scope of Application
Finished Products
Marble, granite, China black, bluestone, jade, ceramic, crystal, glass, plastic, chemical synthesis of plate glass, PVC board, wood, aluminum panels, metal, plastic and other materials for line engraving, 2D sculpture, 3D sharp sculpture, three-dimensional relief, cutting, drilling.
Stone, tombstone processing, advertisement, decoration, and crafts industry, etc
Usage: stone carving, tombstone processing, advertisement , decoration and craft industry, etc.