Publish Time: 2021-11-18 Origin: Site
The Stone Engraving Machine is designed to realize X-Y-Z-A 4-axis linkage with more wider utilization.
It can be used for cutting, chamfering, polishing, slotting, drilling and arc grinding etc. with easy operation and more practicability.
First of all, we must start with the production equipment and choose reasonable mechanical equipment, which can have a certain dust-proof effect. Dust-proof equipment is also indispensable. When choosing, consider the degree of purification, so that it can play a certain role in dust prevention. effect. Generally, sound-absorbing cotton is used to make a cabinet, which is both soundproof and dustproof, and then leave a mouth to connect to the vacuum cleaner, and pump it at intervals.
Workers should wear glasses and masks during operation, which can protect the glasses and respiratory organs, avoid dust damage, and also play a certain role in dust prevention. At present, there is no company that installs large-scale dust-proof equipment, but you can install a vacuum cleaner on the machine tool itself, which can also have a good effect and protect the health of the operators. Stone carving machine
Engraving machine will produce a lot of dust when it is used. To eliminate dust pollution fundamentally, it is necessary to take the route of comprehensive treatment, starting with production equipment, selecting advanced and reasonable machinery and equipment, supplemented by certain dust-proof and dust-proof measures. But under current conditions, the most effective measure is to choose dust-proof equipment.
The choice of dust-proof equipment should consider the degree of purification required at the operation site and the nature of the dust. Large wood dust and medium wood dust can be collected in time on site, while for the most harmful fine wood dust, the traditional effective method is to use pneumatic dust collectors or bag vacuum equipment to collect.
The correct use of the dust cover of the engraving machine can extend its service life. Let me share with you the common sense that you must know when using the dust cover of the engraving machine. First, check every day to remove all kinds of chips and other dirt on the surface to prevent the accumulation of debris, check whether the running track meets the requirements of lubrication, and prevent damage caused by huge friction caused by insufficient lubricating oil. Look at the surface. Whether it is very smooth and whether there are scratches, as a basis for early detection, these problems should be repeated before the end of the afternoon. These tasks are the focus of every day, and I hope to attract everyone's attention.
Secondly, the content of the regular inspection is mainly the inspection of the dust cover of the engraving machine to prevent dust and abrasive particles from adhering to the surface of the cooling pipe.
Stone Engraving Machine Application:
* Bas-reliefs,
* Line engraving Cutting, Edge inversing
* Funeral tablets/gravestones, Milestones
* commemorative plates
* Furniture, Fireplace.
* Countertops, Sink hole, grooving, shower trays