Publish Time: 2022-05-17 Origin: Site
Industrial laser cleaning machine is a greener cleaning method than traditional cleaning. The laser cleaning machine uses high-frequency high-energy laser pulses to irradiate the surface of the workpiece, and the coating layer can instantly absorb the focused laser energy, so that the oil stains, rust spots or coatings on the surface are instantly evaporated or peeled off, and the surface attachments or surface coatings can be removed efficiently at high speed. The layer is cleaned in such a way that the laser pulses with very short action time and will not harm the metal substrate under the proper parameters.
1) Non-contact cleaning,without damage substrate.
2) High precision cleaning,selective washing.
3) Without any chemical cleaning fluid and no consume materials,safe and environment protecting.
4) Good cleaning effect and time-saving.
5) Laser cleaning system is stability,almost no maintenance.
Which products need rust cleaner laser?
From metal to nonmetal applications, if your product is covered by contaminants — including rust, grease, mold, oil, or others — then rust cleaner laser may be the right solution for you. Laser cleaning works best on targeted areas and uses laser light to absorb into and remove contaminants. With thousands of laser pulses per second, you can clean anything — from a small area on an aircraft to the bulkhead of an aircraft carrier. Plus,
The Advantage of Pulse Fiber Laser Cleaning Machine:
It’s a non-contact, non-abrasive process. Home remedies are messy and unhealthy. Scrubbing off rusted surfaces exposes you to impurities which could lead to respiratory complications. Laser cleaning, on the other hand, relies on the laser beam to ablate the surface. There is no physical contact between you and the rust.
No use of chemicals. Rust remover chemicals can get the job done, but the health implications on their use outweigh their benefit. Such chemicals are not only harsh and abrasive but also emit intense fumes. You will need to wear protective gear such as a respirator, goggles and rubber gloves before using them. However, laser cleaning does not rely on any chemical application. It is the better choice as it does not put your health at risk.
No secondary waste is produced. Scrubbing off rust from surfaces only disintegrates the rusty particles from the substrate, leaving you with a toxic lump of rust dust at the end of the process. Electrolysis leaves the rust particles floating in the water, which you later have to dispose of. In comparison, laser cleaning is a cleaner process as the rust particles are either vaporized or turned into plasma, leaving no evidence of waste.
High precision. The focused laser beams have an extremely precise focal edge, allowing you to ablate rust from tough spots that would otherwise be harder to clean with other apparatus. Such include the rust that develops around bolts and rails. Additionally, the high precision allows you to focus the laser beam repeatedly over a specific area to achieve the required depth and result.
It’s effective on all surfaces. Unlike other rust removal procedures, laser cleaning works on all surfaces that are prone to rusting, including stones, concrete, iron, aluminum (bauxite) or copper.
It does not degrade the substrate. Scrubbing rusted surfaces significantly degrades the substrate due to friction. Rust removing chemicals, on the other hand, are harsh and corrosive, causing wear and tear that could spoil delicate metals or even weaken their robustness. Laser cleaning in comparison ablates the surface while leaving the substrate untouched.
It is a long-term solution. A laser cleaning machine will serve you longer than any scrubber or rust removing chemical will. The laser does not suffer any wear or tear, and thus can be used and reused over its lifetime.