What Are The Reasons For The Large Cutting Slope Of The Sheet Metal Plasma Cutter?

Sheet metal plasma cutter are currently used more and more widely, It is mainly used in the metal cutting industry of mechanical and electrical products shell processing, lighting industry, ventilation ducts, advertising signs, process decoration, iron gardens, automobile manufacturing, ships, electrical accessories, chassis cabinets and other metal

The cuts of the workpieces cut by plasma router cnc are generally neat, and the cutting slope is estimated to have the following reasons:

1. The slits cut by the CNC plasma cutting machines are related to the air pressure. The air pressure from the cutting nozzle is too small. The quality of the slit is not good;

2. The cutting torch did not correct when cutting, that is, did not grasp the cutting angle;

3. If the cutting nozzle of the cutting gun is used for too long, it will affect the cutting seam if it is not replaced. After the cutting nozzle is used for a long time, the front air outlet will be deformed, that is, it is not very round, which will affect the airflow of the air outlet. Crooked, the slit is crooked;

4. The quality of the thin plate cut by the larger CNC cutting machine will be better, but the quality of the small machine is not ideal.

A sheet metal plasma cutter uses a plasma cutter to cut thin to thick metals along a multi-axis grid. The CNC method provides an advantage over handheld plasma cutting tools due to the cut being programmed and controlled by a computer instead of human motion. CNC plasma is where high speed and precision meet low cost – among a vast array of additional benefits.

STARFIRE with THC Control System

Sawtooth worktable

When the elliptical plasma arc of the CNC plasma cutting machine penetrates the cutting material, the elliptical arc surface will incline the cutting surface at a certain angle. In practical applications, we need to know what the angle of inclination is according to different processing needs. To determine whether the cut material can meet the requirements of secondary processing.