Method For Preventing Cutting Error Of Plasma Pipe Cutting Machine

Plasma pipe cutting machine feature industry leading Hypertherm HyPerformance plasma, a China designed and built system. CNC plasma cutting machines is capable of piercing and cutting gauge metals all the way up to two inch carbon steel, and even thicker non-ferrous metals, all with the same plasma torch, and an automated gas delivery system! The operator simply selects the material type and thickness, pulls the shape or nest of shapes from the CNC library, and pushes start.

The factors that affect the quality of CNC flame cutting and cause dimensional errors in cutting are organized and analyzed as follows:

1. If the flatness of the board is not good, the size is easy to change after cutting;

2. For long strips with large length and width, use common edge cutting, cut the long edge first, and then cut the short head after the steel plate cools.

3. Due to the slow flame cutting speed and the long preheating time, the steel plate will absorb heat and cause thermal deformation, which can be solved according to the shape and experience of the part when preparing the CNC cutting program.

4. In the cutting process, the internal stress of the material will be released and the local internal stress will be released and redistributed with the removal of the material, which will cause the displacement and deformation of the steel plate and cause the cutting size to be out of tolerance.

According to the above factors that cause errors, I believe consumers can effectively prevent cutting errors during the use of plasma pipe cutting machine!

CNC plasma cutters are available in a range of different sizes, prices, and functionalities. These machines are highly accurate and can slice through metals at speeds of up to 500 inches per minute. While high-definition plasma cutters require a plasma gas and an assist gas to function, the type of gas will vary depending on the material being cut. Some of the gases that can be used in plasma cutting include:

Oxygen—can be used to cut mild steel up to 1 1/4 inches thick but causes rough-looking cuts in stainless steel and aluminum.

Argon and hydrogen mix—provides high-quality, smooth cuts in stainless steel and aluminum.

Compressed air—works well for low current cutting applications in metals up to 1 inch thick.

Nitrogen—can be used to cut thin stainless steel.

Methane—can be used to cut thin stainless steel.

Plasma pipe cutting machine Application：

1.The Suitable material:

This plasma cutter can work on Iron Plate, Aluminum sheet,Galvanized Sheet Stainless,Titanium plates etc. metal sheet and metal pipe can both cutting.

2.The application industries:

Cars, motorcycles, pressure vessels, chemical machinery, nuclear industry, general  machinery, engineering machinery, steel structure, shipbuilding and other industries.