Professional Carbon Steel CNC Plasma Cutter For Sale

CNC plasma cutter for sale is in high automation and efficiency,easy operation and long service time. The plasma cutting machine is table structure with double-driven system, working size can be customized upon requirement. It can be used for cutting carbon steel, stainless steel and non-ferrous metal in any 2D graphics,this is widely used in metal cutting fields.

Reasons for deviation of cnc plasma cutter for sale：

The CNC cutting machine has a lot of dust and oil stains. The horizontal double-axis guide rail will definitely affect the cutting accuracy of the plasma cutting machine, so first measure the horizontal walking accuracy of the CNC cutting machine. Is it correct? Push the CNC cutting under the condition of power. If the motor in the transverse direction of the machine does not move or there is no gap, it means that it does not have many relationships with the motor in the horizontal direction of the CNC cutting machine.

First, determine whether the parameters on the plasma cutting machine have been moved. Then first remove the horizontal motor of the plasma CNC cutting machine, start to push the height adjuster, see if there is any slipping phenomenon, and then check the above bearing. The wear is not serious.

In fact, these are the problems caused by not paying attention to maintenance at ordinary times. Replace the new bearings, and the CNC cutting machine resumes operation. The problem is solved. The maintenance and maintenance of the CNC cutting machine are repeatedly emphasized. No matter how busy, you must clean up the dust. And iron filings, in fact, the CNC cutting machine is usually a small problem, which saves the plate and improves the efficiency

What is the use of plasma CNC cutting machine?

What materials can a plasma cutter cut? Plasma CNC cutters are used for cutting sheet metals, square and round metal tubes, including iron, cold rolled steel, hot rolled steel, stainless steel, galvanized steel, carbon steel, copper, brass, alloy, bronze, aluminum, titanium. Plasma machines are widely used in the industries of machine tool manufacturing, petro-chemical equipment, light-industrial machinery, pressure vessel, shipbuilding, mining machinery, electric power, bridge construction, aerospace, steel structure, etc. Plasma cutters can be applied to hobbyists, home shop, home business, small shop, small business, school education, industrial manufacturing.

Weekly maintenance and maintenance:

(1) The machine should be cleaned up every week, the horizontal and vertical guide rails, transmission gear racks, and lubricating oil should be added.

(2) Check whether the horizontal and vertical rail wipers work normally, and replace them in time if they are abnormal.

(3) Check whether all the cutting torches are loose, clean up the rubbish of the ignition muzzle, and keep the ignition normal.

(4) If an automatic height adjustment device is attached, check whether it is sensitive and whether to replace the probe.

(5) Check whether the plasma cutting nozzle and electrode are damaged and whether the cutting nozzle and electrode need to be replaced.

F2300A multi-function CNC control system(Or Starfire control system)