Stone Carving Machine -Stone CNC Router

CNC stone carving machine mainly used for marble,granite,blue stone,sand stone, tile, glass,rystal,artificial stone,tombstone,mile stone, jade, etc, also can for the woodworking materials, metal, adveritising materials processing

For processing industry, the number of products per unit time processing affects the cost and profit of the product. So is a stone carving machine, so how to improve the machining efficiency, try to reduce the processing cost For we do stone carving of friends, the most main is according to the raw material hardness and stone engraving cutter performance to determine a reasonable cutting dosage, also is what we usually call each layer depth under the knife. Of each material will be one of the biggest turning tool, we use stone engraving machine for processing time try not to use the biggest turning tool for machining, long processing, cutting tool damage more quickly. And under the maximum turning processing speed also do not go up, is likely to cause a quickly speed cutting knife. So we were not under the knife set to 2/3 of the maximum amount of such tool life will increase greatly, processing speed can also increase a lot; So that both can save the tooling cost, also can improve the machining efficiency.

Stone Carving Machine Features:

1. Machine body and gantry whole cast iron or aluminum , stable , no deformation , little shock , moving stability .

2. Imported high quality ball screw , precision segmentation , to achieve the high precision engraving .

3. Air or water cooling spindle, more powerful,high rotated speed (24000rpm),low noise, not easy to break cutters.

4. High precision control system, high stability , high efficiency , easy to learn .Continuing working after the break point /power failure , lower the rejection rate .

5. Good software compatibility can compatible with the ArtCAM/Type3/Ucancam/JDPaint such CAD/CAM software , 2D/3D processing ,more convenient to using.

Application material

MDF, wood, plywood, solid wood, PVC, acrylic, double-color board, plastic plate, luminous panel, organic glass, aluminum, copper, sliver, gold, iron, stainless steel and other materials

The price gap of stone CNC Router machine is large, mainly affected by the following factors:

The brand of the Stone Carving Machine is different. At present, there are many manufacturers and brands of such equipment on the market, and the price will be affected by the brand.

The power of the engraving machine. Because the hardness of the wood material is relatively large, in general, woodworking engraving machines need to be equipped with a spindle motor with a higher power. The higher the power, the higher the price will be.

The beam of the engraving machine, some of the engraving machines on the market are made of steel, and some are made of aluminum, and the price difference is also very large.

In terms of transmission mode, the engraving machine is divided into a screw machine and a rack machine. The price of the rack machine is much more expensive than the screw machine. The screw machine is generally used in the advertising industry. Those who do mahogany furniture are also recommended to choose this Various model, and the rack machine, the transmission speed is relatively fast, generally used for cutting, wood door processing, etc. It is not that the rack machine is not suitable for the advertising industry, but the rack machine is used in the advertising industry, the cost performance is not great A bit overkill. The three axes of the screw machine are screw drives, the XY axis of the rack machine is rack drive, and the rack machine is dual drive.

The bed of the engraving machine is mainly divided into three types: channel steel, square tube, and cast iron. Those who are familiar with this equipment generally know that the bed of cast iron is good. If the square tube is thickened, the cost is more than that of cast iron. High and better stability than cast iron, requires specific analysis.

If it is also a rack machine, the price difference is also very large, which must be compared to each part of the engraving machine. For example, the main shaft is generally divided into water-cooled and air-cooled, and the price is different according to the brand.

Technical Data

Optional Parts for Stone Carving Machine:

1. Machine Working Size : DEK-00609S,DEK-1212S,DEK-2513S,DEK-3015S

2. Bigger or smaller power spindles (4.5KW,5.5KW,7.5KW ect )

3. High-grade cooling system (chiller, it has alarming system)

4. double-head or more heads

5. Cylinder rotary clamp (for cylinder materials working. Like cup, pen, bottles, logs etc)

6. servo motors (China brand or Japan brand)

8. Auto tool change system

9. NC-studio or DSP controller

Machine Configuration

HQD 4.5kw water cooling spindle

HIWIN guide rails | TBI ball screw

LEADSHINE Step Drive and Stepper Motor | Japan SHIMPO reducer

Stone CNC Machine Utilization

Applicable Field

It is ideal for stone and aluminum working applications.

Materials Good for

EA-1325S is suitable for Marble, Granite, Jade, Aluminum, Sandstone, Artificial Stone, MDF, Solid Wood, Plywood, Solid Surface, White expanded PVC, HDPE, PVC, and more.