1000W 1500W Laser Cleaning Machine Handheld

This type of laser cleaning machine handheld main for cleaning rust，Manchine chose continuous wave fiber laser,it's not suitable for high-precision products.

Laser cleaning equipment is a new generation of high-tech surface cleaning products. It is easy to install, control, and implement automation. With Simple operation, switching power supply, open the device, then it can be achieved cleaning without chemical reagent, medium and water washing, it has many advantages of the focus adjustment manually, joint surface cleaning, higher cleaning surface cleanliness, it also can remove the surface of resin, grease, stains, dirt, rust, coating, paint on objects.

Advantages of laser cleaning machine:

1) Automated assembly line:

The laser cleaning machine can be integrated with CNC machine tools or robots. Therefore we can implement remote control and cleaning.  It can realize the automation of equipment, form a product assembly line operation, and intelligent operation.

2) Accurate positioning:

The use of optical fiber to transmit and guide the laser to make it flexible. Then the built-in scanning galvanometer to control the high-speed movement of the light spot. Therefore, it is convenient for non-contacting of irregular parts, holes, grooves and other parts that are difficult to reach by traditional cleaning methods Ground laser cleaning treatment.

3) No damage:

Short-term impact will not heat the metal surface and cause no damage to the substrate.

4) Good stability:

The pulse laser used in the laser cleaning machine has a long service life, usually up to 100,000 hours. What’s more, it comes with high stability and good reliability.

5) No environmental pollution:

Firstly, there’s no chemical cleaning agents required; Secondly, no generation of cleaning waste liquid; Thirdly, the pollutant particles and gas during the laser cleaning process can be collected and purified by the portable exhaust fan to avoid environmental pollution.

6) Low maintenance cost:

There is no consumables during the use of the laser cleaning machine. And the operating cost is low. Only the lenses need to be cleaned or replaced regularly in the later period. Therefore, the maintenance cost is low and close to maintenance-free.

Which products need laser cleaning machine handheld ?

From metal to nonmetal applications, if your product is covered by contaminants — including rust, grease, mold, oil, or others — then laser cleaning may be the right solution for you. Laser cleaning works best on targeted areas and uses laser light to absorb into and remove contaminants. With thousands of laser pulses per second, you can clean anything — from a small area on an aircraft to the bulkhead of an aircraft carrier. Plus, we provide laser solutions for:

Welding and bonding treatments

Coating preparation

Nuclear decontamination

Surface prep for non-destructive testing/investigation

How to Select the best Fiber laser cleaning machine?

Power of Laser

The laser cleaners usually come in 3 power categories. Although the exact specifications vary from machine to machine, however, the power categorization will give you a general idea about the machine that will best suit your requirements. With the increase in power, it increases the speed of rust removal and the amount of rust.

Low Power Cleaner

The low-power laser cleaners range from 20W to 100W power laser. This type of power is ideal for light rust removal and the speed is not of the great matter here. Furthermore, it is also ideal if you have a relatively small set-up where the batch handling is not very large.

Another benefit of using the low-power laser cleaner is the cost reduction of the machine. Thus, if you want to keep your spending low then this is the ideal machine for you.

Medium Power Option

The medium power laser cleaners usually range from 200W to 300W. These machines are ideal for the removal of medium levels of rust/grease from the materials. However, one important thing to note is that due to the higher power of the laser, it produces more heat.

Thus, there is a requirement for an effective cooling mechanism with the laser. You need to check with the vendor/manufacturer the cooling mechanism in place for the cleaning operation. If the cooling mechanism is not effective, then your machine and the product both will suffer.

High Power Laser Cleaner

The high-power laser cleaners are for handling absolute heavy-duty metals. These machines come in the category of 350W, 500W, 1000W, or even up to 2000 W in some cases.

However, because of the increase in power, the price of these machines is very high. Therefore, you will only choose these machines if you have a large production/repair unit where heavy-duty metals operate.

Machine Parameters