English
Views: 21 Author: Site Editor Publish Time: 2022-12-01 Origin: Site
3 types of CNC router tables:full vacuum CNC router machine table,aluminum T-slot CNC router machine table, and T-slot vacuum table.So which one is the most suitable CNC router machine table for you? How to distinguish them? Let us look at the wooden cnc router table design.
The CNC router machine table is as important as the CNC router machine, mainly because all high-precision and high-precision cutting are performed here. When choosing a CNC router machine table, please choose a suitable router machine table according to your processing needs.
The T-slot vacuum CNC router table has a more flexible fixing method, which is suitable for processing irregularly shaped workpieces.
The aluminum T-slot table and the CNC router machine vacuum table have their own advantages, and we can’t simply say which one is better. From the point of view of the speed of fixing the workpiece, the CNC Router vacuum table is of course faster, only a little more than ten seconds, and it takes a few minutes to fix the work more efficiently than the aluminum T-slot table. However, certain materials and processing techniques are not suitable for CNC Router vacuum tables. Therefore, the desktop of the CNC router machine should be selected according to the workpiece material and processing technology.
If your processing materials need to be used, there are two work surfaces, an aluminum T-slot table, and a CNC router machine vacuum table. Don’t worry, IGOLDENCNC has upgraded the traditional CNC router machine vacuum table and added it to the CNC router machine vacuum table. Aluminum T-slot profile, so the workbench has the advantages of both vacuum and T-slot.
Our machine adopts a vacuum and T-slot dual-purpose workbench, which can use clamps to fix small-scale materials, which can save the power of the vacuum pump, and vacuum adsorption can also be used to fix large-scale materials. Open the vacuum valve and directly fix the engraving board, which has the advantages of convenient loading and unloading, saving time, high efficiency, and fast speed. Suitable for wooden door processing and large-scale panel carving. If you need to cut small parts and letters, or workpieces with many holes, or thin and soft materials, you can fix a cnc presser foot on the spindle, which is a very useful tool. Therefore, the processing is convenient, simple, and efficient.
The full vacuum table is more efficient and is suitable for cutting and engraving large flat panels of panel furniture.
The vacuum suction table means that the table of the engraving machine is vacuum suction. The function of vacuum adsorption is to put the workpiece on the worktable, turn on the vacuum pump, open the control valve, and directly suck the workpiece onto the worktable without clamping it with a clamp. At this time, the engraving machine starts to work, and the entire loading and unloading process does not exceed ten seconds, with high efficiency and fast speed. It is very suitable for the line carving of wooden doors and panel furniture.
The vacuum workbench can be divided into four, six, or eight areas. In this way, the adsorption function can be further enhanced. Now, the vacuum table with 6 zones is the most popular. We can also design the area according to customer needs. You only need to open the valve next to the vacuum table to perform the corresponding work in this area.
Line carving, modeling, grooving, and cutting of wooden doors and panel furniture. The wire engraving and cutting processing time of wooden doors or panel furniture is high-speed and can be processed in about a few minutes. If an aluminum T-slot workbench is used, it takes a few minutes for workers to fix the circuit board, which is not a good choice. However, using a CNC router machine vacuum table, it only takes ten seconds to set up the workpiece. From an efficiency point of view, line carving and panel furniture cutting are more suitable to choose CNC router machine vacuum table.
The aluminum T-slot work table is more economical and is suitable for hollowing, embossing, and engraving of 3D materials.
The T-slot contour fixed table is a way to fix the workpiece on the table by manually tightening the screws. The profile table is an aluminum profile with a T-slot at the bottom and a layer of PVC material on the top. Then use a splint to fix the workpiece to be engraved on the worktable so that it can be fixed arbitrarily according to the size and thickness of the workpiece.
It has the characteristics of low cost, flexible method, cost-saving, and the price is lower than the price of the vacuum table.
Suitable for workpieces with irregular shapes, difficult to fix, or workpieces with non-absorbable materials (such as copper and aluminum). When processing technology, especially embossing, hollowing, cutting and other processing technologies, the aluminum T-slot workbench is the best choice for users.
Since the engraving time of the relief pattern is relatively long, there is no need to worry about the few minutes of manual fixing on the splint, and the vacuum pump cannot absorb the hollow relief cutting and other processes.
The woodworking engraving machine of the profile fixed table is suitable for embossing handicrafts, hollow partitions, screens, and other home decorations, advertising industry PVC, acrylic, two-color board cutting, and engraving, etc.
