English
Views: 17 Author: Site Editor Publish Time: 2021-08-17 Origin: Site
Nesting CNC router machine with gang drilling and 2 spindles is used for carving, engraving, milling, slotting, grooving, cutting, chamfer edge, and the nesting CNC router machine can finish the whole panel furniture production Price:14035-19127$
12 HP HSD high frequency automatic tool changer spindle
Osai Industrial grade CNC controller
Maintenance free brushless AC servo motors and drives
4-Zone vacuum t-slot table
Pneumatic material placement stops
Hand-held pulse generator with rotary hand wheel
PC with flat screen monitor, keyboard and mouse
Easy to use Techno CNC Interface
Open architecture works with all industry standard CAD/CAM software
Advantage of Cabinet Making Machine:
1. Increase 10% material usage
2. Reduce the dependence of the technical workers.
3.Decrease of sorting procedure and sorting error.
4. Save both time and labor for complicated workpiece processing.
5. It can also groove and drill.
6. Improve the product quality and the efficiency.
Working Area | 1300*2500*300mm |
Machine structure | G6 bed column |
Spindle | HQD 9KW air cooling Automatic tool change+9 holes vertical drilling |
Spindle Speed | 0-18000 rpm |
Inverter | FULING |
Guide rail | PEK |
Reducer | Taiwan SHIMPO |
Working table | Double vacuum suction table |
Control system | Taiwan LNC |
Vacuum pump | 7.5KW water vacuum pump |
Max idle speed | 50000mm/min |
Max engraving speed | 20000mm/min |
Voltage | AC 380V-50HZ |
Weight | 2500KG |
taly FAM Drilling Head
The most pupular FAM boring head is 5+4 vertical model. The boring heads for CNC machines are available in a wide range of models with vertical spindles, horizontal spindles or cutting units. FAM use of pneumatically driven units with oval section pistons guarantees a 35% increase in thrust in the spindle lowering mechanism, compared to traditional units with a circular section. The independent spindle boring heads are equipped with a series of remote controlled solenoid valves with just one connection,
Finished material pushing system&Vacuum brush
The machine comes with the finished material pushing system&Vacuum brush.
The finished material pushing system will push the cutted material move to the front of the machine table, and at the same time,
the vacuum brush at the back of the beam will suck the small wood chips that left on the table. Prevents the scum from affecting
the vacuum sucking function. It will make the machine vacuum suck the material more firmly.
eliminating the need to wire each individual spindle.
