CO2 Laser Cutting Machine - A Precise And Cost Effective Laser Cutting System

Want the best of both worlds out of your CO2 Laser Cutting Machine? don’t want to go all in on a professional Fibre Laser Cutter but would still like to process metals?

Our Metal/non metal CO2 Laser cutting & engraving machine is the one for you.  With it’s powerful 150W Oxygen assist cutting head and easy to use software, cutting both normal laser material and metal in one machine becomes a reality with this spacious 1300 x 900 mm cutting area.

With our Metal/Non Metal 90130 Lasertech, you also have the capability to cut metals such as mild and stainless steel (max of 2mm and 1mm respectively).

Features and Advantages of CO2 Laser Cutting Machine: 

1. The CO2 laser cutting machine adopts open-type worktable, which is widely used in cutting and engraving large size materials with high precision and speed, such as advertising, light industry, woodworking, arts and crafts.

2. Powerful stepper motors and high imported HIWIN linear guide ensure the fast speed and stability.

3. DSP control: RD6442 control system with high speed, stability, anti-interference ability. Advanced USB control and Flash Disk (U Disk) off-computer control system are optional.

4. Independent R&D efficient laser power: New high-voltage switch-mode, PWM master control technology, which is more stable.

5. Professional software for laser machine, which can support PLT, DXF, BMP, AI, DSF formats, it is applicable for drawing programs such as Corel Draw, PhotoShop, Auto-CAD, etc.

6. The CO2 laser cutting machine has 512 memory which will allow to save and store files in the machine and can work without connecting computer.

7. Good design of dust-proof structure for X, Y axis to ensure longer life of the machine.

8. The stability and integrity design idea with advanced industry cooling system and water alarm Automatic Protection Function, improve the stability and safety of continuous operate. Perfect dust, pollution prevention design greatly improve the overall stability of the machine.

9. Using flying path design, unique structure, small optical path deviation, high stability, easy to adjust. 10. Optical Accessories adopts best imported K9 mirrors and ante focusing mirrors whose reflectivity and transmittance is the best with more detailed spot, more cutting edge . 

Detailed introduction of CO2 Laser Cutting Machine：

1、CO2 laser tube

CO2 laser tube power available: 60w, 80w, 100w, 130w, 150w, 180w.

60w, 80w, 100w are able to do both good engraving and cutting. 130W and above are for cutting. Stronger laser power cuts thicker.

2、RuiDa RDC6445G control system

Front panel for RDC6445G controller. Emergency stop and ammeter.

Laser power supply.

Laser power supply, supplies stable power for the laser tube, ensure laser tube good performance and laser output.

3、Optional worktable : honeycomb table

For hold soft materials: cloth, leather, paper, etc.

4、Electrical and Control System

RuiDa RDC6445G controller. Files can be exported directly from computer to the machine software by machine cable, also you can choose to export to an USB flash and then download to machine.

5、Rear opening

There is an opening at the back of the machine. The rear opening allows longer material to pass through.

6、water cooling system: water pump or Industrial S&A  water chiller with CW-3000 / CW-5000 / CW-5200 / CW-6000.

S&A brand industrial water chiller. The water circulation cools the laser tube, protects the laser tube from high

temperature during working. It ensures stable laser output.

7、Air blowing pump

The air pump blows air to the laser head. It removes the heat and avoids material burning. Engraving cutting is bette

8、Exhaust fan (extractor)

Exhaust fan can remove the fumes caused during engraving and cutting.

9、Safety interlock

When the front door of the machine open, the machine stops working. It is a safety device.

10、WIFI device

Files can be transfer to machine via WIFI, instead of transferring via cable or USB flash. It is more convenient.

Application industry of G.Weike 25mm plywood/MDF/wood/die board 300W 500W Co2 laser cutting machine price

Advertising industry, handicrafts , shoes, toys, computer embroidery cutting industry, garment  model, construction industry, metal cutting, electrical switch manufacturing , elevator manufacturing , household appliances manufacturing , kitchen utensils manufacturing , tool processing  , and other machinery manufacturing and processing industries.

1325 CO2 laser engraver machine parameters: