Glass Cutting Equipment /Automatic Glass Cutter

A critical part of any glass cutting equipment project is to properly identify the type of glass you have to work with. This is one part of the manufacturing process you can likely control because you’ll need to purchase the items to engrave. If you allow customers to bring in items, make sure you find out the type of glass you’re working with so you know how to adjust the laser engraving process.

Our automatic glass cutter is widely used in online/offline cutting of flat glass, ultra-thin glass, LCD glass, ceramic glass, amorphous glass. It is easy operation, work steadily, high cutting speed and precision, long cutter life and free for repairing.

Engraving speed

The ideal engraving speed for glass can be a bit of an experiment based on the exact glass composition and item shape. Another practice that will have a huge impact on the result of an engraved product is the level of engraving speed. If you’re working on a large number of glass bottles, the ideal engraving speed to minimize discrepancies in the outcome is to set the laser engraving machine speed at medium along with the high power setting.

Lower DPI

When we talk about lower DPI, this refers to the resolution — for example, 300 dots per inch. Lower DPI produces a better outcome on glass material and reduces the issue of rough engraved glass. The lower DPI places the etch dots farther away from each other, which enables you to produce a clear design without considerably weakening the glass or causing sharp edges.

Masking

This practice is optional and may not affect the outcome of the engraved glass or mirror product. However, if you prefer to apply masking on your laser engraving project, the material you’ll need is a wet paper towel or a wet sheet of old newspaper. Masking prevents heat dissipation (reduction in heat temperature) that could lead to glass chipping or creating uneven surfaces. When using masking, see to it the wet paper towel or newspaper stays flat on the glass surface. Any bubbles or creases can cause defects in the etching or engraving, which would look unsightly to customers.

Polishing

Among the common practices laser engravers apply in most of their laser glass engraving projects is polishing. The polishing agent can be a ScotchBrite pad or anything similar that can clean and buff the surface of the glass. Polishing will remove all traces of glass fragments left on the glass surface. This helps give the product a refined look that customers will appreciate.

Glass cutting machine use and maintenance of note:

1, glass cutting machine should be trained professionals.

2, the equipment should be always kept clean, per shift to upper and lower guide rail and gear to wipe and refueling. 3, equipment after shut down the computer in the preservation have shut down the computer after data and power supply, place the operator damage to equipment and change data.

4, often the abnormal sound, check whether the moving parts of abnormal should immediately stop check, eliminate the malfunction.

5, after troubleshooting, should check whether the blade wheel is before starting the return to the origin, avoid boot after the beam out of the guide rail. （ Pay special attention to point)

6, the equipment should be used to clean compressed air, avoid premature damage the pneumatic components.

7, cutting machine power, they can prevent the leakage.

8, in the unit and the upper machine, double pieces into line cutting machine should be below 2 - on the machine 5 mm, 2 - higher than to break off the machine 5mm。

9, when cutting glass cutter wheel must fuel ( By using kerosene) , often should check whether lower mailbox oil shortage, short of oil in a timely manner.

The wide application of glass cnc machine:

This glass shape cutting machine is suitable for all kinds of photoelectric glass,ultra-thin glass and mirror in straight, irregular and circular shape cutting.