1000W Laser Cleaning Machine For Rust Removal

laser cleaning machine for rust removal is a new generation of high-tech surface treatment products, which are easy to install, operate and realize automation. The operation is simple, the power is turned on, and the equipment is turned on to perform cleaning without chemicals, media, and water. The focus can be manually adjusted, and the surface can be cleaned. The cleaning surface has high cleanliness and can remove resin, paint, and oil on the surface of the object. , Stains, dirt, rust, coating, plating and oxide layer, and widely used in the industry, covering ships, auto repair, rubber molds, high-end machine tools, rails, and environmental protection.

Laser cleaning machine features:

High-efficiency,good effect

Automation.Stable cleaning efficiency.No chemical cleaning fluidrequired.

Real-time monitor cleaning quality

Real-time monitoring of cleaning effect.Precise cleaning, with accurate location, precise size and selective cleaning

Without damage to parts matrix.

Accurate positioning without damage to parts matrix. Laser cleaning machine can clean the surface of very sensitive materials, such as aluminum, carbon, stainless steel,Carbon fiber reinforced polymer or coating material without damaging the material.

Eco and Environmental protection

High cleaning cleanliness.Precise cleaning, with accurate location. effectively clean up micron-level pollution particles. safe and environmental protection,no consumables.

Hand held laser rust removal advantages:

1.non-contact cleaning, does not damage the part substrate.

2.precise cleaning, can achieve precise location, the exact size of the selective cleaning.

3.laser-cleaning-machine without any chemical cleaning fluid, no supplies, safety and environmental protection.

4.simple operation, power can be hand-held or with the robot to achieve automated cleaning.

5.cleaning efficiency is very high, save time.

6.laser cleaning system is stable, almost no maintenance.

How It Works

Laser cleaning uses a machine that aims a laser pulse at high power onto the rusty surface of a material. The laser energy is absorbed by the organic material lying on the surface of the substrate while the non-organic substrate remains untouched.

The laser beam is passed over the surface until the preferred depth and area have been completely rid of the rust. At low flux, the laser energy from the beam ablates the surface while vaporizing the rust. At high flux, the laser energy converts the rust or other unwanted material to plasma. Both low and high flux get the job done, but their use depends on the type of surface in question.

There are two distinct laser cleaning processes; coating removal and surface decontamination. The former is characterized by removing a layer of unwanted material from the surface of a substrate. It is most effective when the physical and chemical composition of the layer differs from the substrate. Such include insulation, primers, corrosion preventive coatings, rubber or paint. Normally, the low flux laser beam is used for this. The latter involves removing the entire upper layer of the substrate and requires high flux laser beams.