China 5 Axis CNC Marble Cutting Machine Price

5 Axis CNC Bridge Saw Series, which takes versatility to a new plane of performance with practicality in countertop and dimensional stone applications. Touch Screen CNC interface allows easy file data and sink .dxf entry, and programming can be accomplished at the machine or offline with CadCam programing being sent to the machine via either network or WiFi. The bridge saw has integrated flexible monitor mounting and a rail that also pivots to allow maximum access to the control while viewing the machine operations.

Composition and use

The Marble Cutting Machine consists of a cutting knife set, a stone conveying table, a positioning guide plate and a frame. The bridge saw machine is made of iron, suitable for dry cutting and wet cutting of various types of stone, building materials, ceramic tiles, granite, marble, cement slab, red brick, refractory Bricks, etc. are essential tools for home decoration.

The Industrial Marble Cutting Machine can cut stones at different depths, and can process stones less than 1m3, which can turn waste into treasure, greatly save stone resources, and also help protect the environment. Various types of stone can be machined Cutting processing, high processing efficiency, combined with the effective use of small stones, make the production cost lower.

Operating procedures

1. Before work

1. Wear work clothes and goggles. The female worker has her long hair curled up and put on a work cap.

2. Carry out detailed inspection on the power switch, the tightness of the saw blade, the saw blade guard or the safety baffle. The operating table must be stable, and there should be sufficient lighting for night operations.

3. Turn on the main switch, try a few turns without load, and allow it to start after confirming safety.

2. At work

1. Operation with gloves is strictly prohibited. If dust is caused during operation, wear a mask or face shield.

2. Do not try to cut small unclamped workpieces.

4. This cutting machine only allows cutting profiles.

5. Do not perform strong cutting operations, and make the motor reach full speed before cutting.

6. No one is allowed to stand behind the saw.

7. Do not lean over or bypass the saw, and do not loose any hand or raise your arm from the saw or workpiece when the saw blade is not stopped.

8. Do not operate when the guard is not in place, and do not put your hands within 15 cm of the saw blade.

9. Before repairing or replacing parts, you must cut off the power and wait for the saw blade to stop completely.

10. If abnormal sound is found, the inspection should be stopped immediately.

3. After work

1. Turn off the main power

2. Clean and tidy up the workbench and venue

4. In the event of personal or equipment accidents, keep the scene and report to relevant departments.

Marble Cutting Machine Features:

XYZAC five axis, A axis 0 to 90 degrees automatic rotation, C axis 0 to 360 degrees automatic rotation.

Cutting straight line, circular, arc, grid point.

slotting, edging, beveling, chamfering and cutting;

Curved surface, engraving, cutting holes, and contouring are all available.

By infrared ray to confirm the position of the workpiece.

Intelligent on-demand typesetting, saving time and materials.

Marble Cutting Machine price:

In China, there are many stone bridge saw machine marble cutting machine factories and each factory have different quality standard. Since different factory own a different design engineer, different steel materials, different electronic part sourcing and different manufacturing steps,so quality of bridge saw machine is big difference. Normally, the price of regular bridge saw machine range from 13000USD to 25000USD FOB China port. Some CNC bridge saw machine price would be higher than regular machine, say about 37000USD or even higher. Before you purchase a bridge saw machine, what you need to confirm is how much budget and what quality level you can prefer. What I am going to say is different price different quality.