English
Views: 10 Author: Site Editor Publish Time: 2022-06-24 Origin: Site
The 1000 watt rust cleaning laser have been developed with the user in mind.
They are designed for straightforward and safe operation.
The ergonomic design of our laser rust removal 1000w enables longer periods of use without overloading the operator.
Laser cleaning equipment is a new generation of surface treatment high-tech products, which are easy to install, operate and realize automation. The operation is simple, the power is turned on, and the equipment is turned on, you can clean without chemicals, media, and water. The focus can be manually adjusted, and the surface can be cleaned. The cleaning surface has high cleanliness and can remove resin, paint, and oil on the surface , Stains, dirt, rust, coating, plating and oxide layer, and the industry is widely used, covering ships, auto repair, rubber molds, high-end machine tools, rails, and environmental protection.
Laser cleaning technology refers to the use of high-energy laser beams to irradiate the surface of the workpiece to cause the dirt, rust or coating on the surface to evaporate or peel instantaneously, and effectively remove the adhesion or surface coating on the surface of the cleaning object at a high speed, so as to achieve a clean process. It is a new technology based on the interaction effect of laser and matter.
Technical characteristics
High cleanliness
Can be accurately positioned and cleaned
Non-contact cleaning to protect the surface of brittle materials
Effectively remove micron-level pollution particles
Environmental protection, no consumables required
1. According to the choice of laser type, 1000 watt rust cleaning laseris divided into continuous laser cleaning and pulsed laser cleaning.
2. Continuous laser means that the output power is constant in time, and the output is continuous.
Pulsed lasers output an independent pulse in time. Generally, the duration of a single pulse is relatively short, but the pulse frequency can be very high.
3. Because continuous 1000 watt rust cleaning laser is a continuous constant power output, the accumulation of surface heat will be very rapid, and the heat affected area will be relatively large. During the cleaning process, the surface impurities will be evaporated and sintered due to the continuous accumulation of laser heat. Some of them will even adhere to the surface of the product under time of cleaning and become difficult to remove. Therefore, continuous laser cleaning is more suitable for rough surface treatment of large-scale structural parts.
Just like hitting the surface of the product with a hammer, the longer the hit lasts, the greater the impact on the surface of the product.
4. The pulse laser adopts a short pulse width laser, which can achieve different cleaning effects by adjusting the pulse duration and pulse frequency.
The single pulse energy of the pulsed laser is very low, but the pulse frequency can be very high, so the product surface can be cleaned quickly, and the heat-affected zone is small.
It is like using a very fine needle tip to click on the surface with high frequency, which can quickly remove surface impurities and have the least impact on the surface of the product.
5. No matter which cleaning mode is adopted, it is recommended to prepare a dust collection system to promptly suck away the dust and impurities generated during the cleaning process to improve the cleaning effect and protect the environment.
IGOLDENCNC provides surface preparation technology that’s both efficient and remarkably versatile for a growing list of industrial applications. Whether the surface is metallic, plastic, ceramics, glass, stone or concrete, the results speak for themselves.
1) Metal surface derusting
2) Surface paint removal paint treatment
3) Surface without dirt, stains, dirt cleaning
4) Surface coating, coating removal
5) Oxide surface,Oil stain and contaminant cleaning
6) Welding surface / spray surface pretreatment
7) Stone figure surface dust & attachment cleaning.
8) Rubber/ plastic/ metal mold residue cleaning
