Why Is A Good Stone Cutting Machine So Expensive

The price gap of stone cutting machine is large, mainly affected by the following factors:

The brand of the stone cutting machine is different. At present, there are many manufacturers and brands of such equipment on the market, and the price will be affected by the brand.

The beam of the stone cutting machine, some of the engraving machines on the market are made of steel, and some are made of aluminum, and the price difference is also very large.

In terms of transmission mode, the stone cutting machine is divided into a screw machine and a rack machine. The price of the rack machine is much more expensive than the screw machine. The screw machine is generally used in the advertising industry. Those who do mahogany furniture are also recommended to choose this Various model, and the rack machine, the transmission speed is relatively fast, generally used for cutting, wood door processing, etc. It is not that the rack machine is not suitable for the advertising industry, but the rack machine is used in the advertising industry, the cost performance is not great A bit overkill. The three axes of the screw machine are screw drives, the XY axis of the rack machine is rack drive, and the rack machine is dual drive.

The bed of the engraving machine is mainly divided into three types: channel steel, square tube, and cast iron. Those who are familiar with this equipment generally know that the bed of cast iron is good. If the square tube is thickened, the cost is more than that of cast iron. High and better stability than cast iron, requires specific analysis.

If it is also a rack machine, the price difference is also very large, which must be compared to each part of the engraving machine. For example, the main shaft is generally divided into water-cooled and air-cooled, and the price is different according to the brand.

stone cutting machine is also a computerised machine with a cutting head that can tilt 45 degree.The touch-sentitive screen,magnestic grid system etc that make the CNC machine high accuracy,stability and efficiency in cutting.It is particularly and ideal machine for high-value and large size thicker marble,granite etc slab processing.

Product Features:

High efficiency for cutting block into slabs with multi-blade combination, this stone cutting machine is the ideal equipment for producing large slabs.

1. SIEMENS main motor with stronger seats.

2. PANASONIC PLC and inverter.

3. Encoder for X, Y, Z movement.

4. Strong cast iron HT200.

5. Double V-shape guide rails enhance the smooth cutting and movement.

6. Touch sensitive Panel Easy for worker to operate.

7. Locking system on vertical beam to protect the machine collaption.

8.Fast hydraulic lifting system.

9. 110sqm per 10 hours for medium hard granite.

stone cutting machine Advantages：

1. The stone cutting machinehead can swing 360 degrees freely, and the plate can be cut at any angle and shape

2. It can be used for cutting large plate, 45 degree chamfering, pot hole, stove hole and oblique line cutting

3. The platform is turned over at 85 degrees to facilitate loading and unloading.

4. The operation is simple and the control system can input data.

5. Equipped with grinding wheel device, it can polish the table face and cutting surface.

Parameter Configuration