2022 Best High Power Laser Cleaning For Rust Removal

Metal corrosion refers to the process of metal damage and deterioration caused by chemical reactions between metals and the environment. After the metal is rusted, the surface will gradually corrode, which will significantly reduce the strength, plasticity and toughness of the metal material, destroy the geometry of the metal workpiece, and shorten the service life of the equipment. Therefore, once the metal material is rusted, it should be cleaned even to avoid various problems due to corrosion. If you are contemplating obtaining a high power laser cleaning for rust removal but don't know if it's a good investment, read on for a breakdown of its applications and advantages.

Whats the difference between high power laser cleaning for rust removal and laser engraving?

Laser engravers are used specifically for marking materials with a laser beam. fibre laser cleaner can both clean as well as mark many different types of surfaces depending upon what type of equipment is being used!

About laser cleaning solution of Igoldencnc laser rust remover system ( laser cleaning machine) as below, it can do rust removal, Greasy dirt removal, paint layer removal, rail rust removal, bronze cleaning and frescos cleaning. mostly use on ship, cultural relic protection, aviation, food industry, rail, automobile peripheral, rubber mould, rail, food industry.etc

Features of handheld laser paint removal

1) Laser Rust Removal: Laser light can easily remove rust, after removal, the surface is restored to a bright metallic color or restoration of original base color.

2) Laser Oil Removal: Metal surface oil cleaning (can remove oxide film at the same time)

3) Laser Paint Removal: removes various paints including auto duco on various substrates and automobiles

4) Stripping coating (galvanized layer, aluminised layer, protective coating, etc.)

5) Removal of aluminium alloy, titanium alloy, copper alloy oxide film

6) Pre-Weld Pretreatments: After laser cleaning pretreats the aluminium alloy, the welding porosity defects are effectively suppressed

7) Cleaning after welding: Non Contact NDT removal of post-weld oxide film and slag residue

8) Aluminium alloy pulsed lasers remove dirt and oxide film before welding

Laser cleaning technology uses nanosecond or picosecond pulsed lasers to irradiate the surface of the workpiece so it can be cleaned. The surface of the workpiece absorbs the high beam laser energy instantly, forming a rapidly expanding plasma (a highly ionized unstable gas), making the  oil stains, rust spots, dust residues, coatings, oxide layers or other layers vaporized or peeled off, so as to efficiently clean and renew the surface.