English
Views: 22 Author: Site Editor Publish Time: 2022-07-05 Origin: Site
Purchasing a engraving wood cnc router is an important decision and large investment for a woodshop. CNC machine is the life of the factory. If a machine breaks down, it will waste time and cost, and bring direct losses to the manufacturers. So the routine maintenance of the machines should not be overlooked. It is very imperative to keep your machine uptime and productivity. Proper use and maintenance of wood cnc router/engraving machine can prevent machinery failures and greatly prolong the machine’s life. And if the machine is well maintained, which can keep the machine in good work condition and stability, so the processing speed and accuracy can be well guaranteed.
So, the regular preservation of the instruments should not be neglected. Proper usage and protection of CNC tools can stop machinery breakdowns and significantly increase the machine’s lifetime. Here are 5 tips for your engraving wood cnc router maintenance.
1,Computer
Regular killing the virus, but can not open the antivirus degree of attention to work carefully interference.
Regular cleaning of the dust of the chassis, and attention to the cooling of the chassis, carefully excessive dust caused by industrial control card error.
Regularly defragment the hard disk, optimize the computer system.
Computer abnormalities can also cause many problems, especially for connecting CNC router, we summarize our technical department maintenance found in the process of wood engraving machine, computer anomalies also give us repair caused a lot of unnecessary trouble, but also delay the customer's business, , asked the client computer maintenance attention to several aspects.
2,the clean-up
Regular cleaning of industrial control box, the biggest killer of dust on the circuit board.
Regular cleaning of the screw to prevent the screw on the stick of a foreign body, screw device is very important, he determines the accuracy of the machine, and the screw also play an important role in the transmission process.
Work is done timely clean countertops, which provides a convenient next to wood CNC router.
Cleanup rail and the rail next to the material crumbs, to prevent the card machine cause the machine in the work process from debris interference.
3,oil
After the addition of oil, slow back and forth to ensure that the lubricant can be uniformly applied to the rail and screw.
Machine unused for long periods should periodically refuel empty go to ensure the flexibility of the transmission system.
First, clean up clean rail with screw, available in cloth (do not shed) clean out the oil on the rails and lead screw and material debris. Low temperatures, rail and screw add oil and antifreeze oil is best.
The refueling cycle twice a month, that is, every two weeks and once oil.
4,the temperature
Machine when not in use, if the room temperature is lower best pour the water in the tank to prevent the cracking of water tanks and water pipes.
The ambient temperature in the operating room, wood engraving machine is best to reach room temperature, at least the staff will not be cold.
View the fuel standard applicable temperature to reach at least the minimum temperature.
Temperature for wood cnc router is not very big, but because of the user to screw with butter, winter also forgot to clean-up, resulting in each boot failed to get off, and some studio temperature is too low, add the oil, can or frozen on the machine is not running.
5,cooling water
Conditional antifreeze cooling.
Pay attention to environmental temperature, be careful because the water temperature is too cold, the water tank and the pipe cracking.
The necessary condition for cooling water for the spindle motor work properly if the cooling water is too dirty motor can be caused by a serious injury, to ensure that the cleaning of the cooling water and pumps work properly.
1, Furniture Making: Using CNC router machine is the best choice to produce large quantities of furniture. And if you want to turn your imagination into reality and make some unique furniture. A CNC router is perfect for the job. CNC router can produce a wide range of personal tailor furniture including beds, dining sets, chairs, staircase, window, modern furniture, office furniture, etc.
2, Cabinet Making: Give your kitchen a make-over with a set of crafted cabinets using your CNC router. This technology lends itself to the creation of shelves, side panels, dados, drawer fronts, and custom doors.
3, Sign Making: A CNC router is perfect for advertising sign carving because it is versatile enough for V-bit carving, 3D carving, fluting, contour profiling, and engraving.
4, Crafts and Art: The range of arts and crafts you can produce with your router is almost limitless, such as jewelry, mirror and picture frames, coins, Christmas decorations, and plaques.
5, Mould Making and Prototyping: Nowadays 5-axis foam mill CNC routers, big gantry router for foam milling,6 axis robotic arm,7 axis industrial robots, are ideal for milling epoxy, foam and clay 3D design models. CNC foam cutting machine can be used to cut molds from EPS foam, polyurethane foam, EVA foam, plastic, etc. They are very helpful for building CNC foam molds and robot fabrication. More and more digital studio choose them.
6, Design: They are widely used architectural millwork. Because of the exquisite detail a CNC router can produce, you can make delicate designs for all kinds of unique architectural touches.
