China 1500w Laser Cleaning Machine For Rust Removal

laser cleaning machine is the new generation of safe, high efficiency, energy saving, environment-friendly metal laser cleaning equipment, using handheld swing cleaning head, touch screen and button control, combined with the advanced integrated control system, the precision CNC fiber laser cleaning machine is assembled. It meets the cleaning requirements of complex shapes and fine positioning in the industrial processing field, and achieves higher cleanliness cleaning effects and lower overall cost production benefits.

Laser Cleaning Machine Features:

* Fast and concentrated pulses with enormous power impact;

* Laser pulses are very suitable for the removal of organic matter;

* The impact of a short period of time will not cause metal surface heating;

* Clean or remove the surface paint layer quickly and cleanly;

* Accurate cleaning and paint removal effect;

* No damage to the material;

How does laser cleaning machine work

1500w laser cleaning machine uses a machine that aims a laser pulse at high power onto the rusty surface of a material. The laser energy is absorbed by the organic material lying on the surface of the substrate while the non-organic substrate remains untouched.

The laser beam is passed over the surface until the preferred depth and area have been completely rid of the rust. At low flux, the laser energy from the beam ablates the surface while vaporizing the rust. At high flux, the laser energy converts the rust or other unwanted material to plasma. Both low and high flux get the job done, but their use depends on the type of surface in question.

The Advantage of 1500w laser cleaning machine

1、It’s a non-contact, non-abrasive process. Home remedies are messy and unhealthy. Scrubbing off rusted surfaces exposes you to impurities which could lead to respiratory complications. Laser cleaning, on the other hand, relies on the laser beam to ablate the surface. There is no physical contact between you and the rust.

2、No use of chemicals. Rust remover chemicals can get the job done, but the health implications on their use outweigh their benefit. Such chemicals are not only harsh and abrasive but also emit intense fumes. You will need to wear protective gear such as a respirator, goggles and rubber gloves before using them. However, laser cleaning does not rely on any chemical application. It is the better choice as it does not put your health at risk.

3、No secondary waste is produced. Scrubbing off rust from surfaces only disintegrates the rusty particles from the substrate, leaving you with a toxic lump of rust dust at the end of the process. Electrolysis leaves the rust particles floating in the water, which you later have to dispose of. In comparison, laser cleaning is a cleaner process as the rust particles are either vaporized or turned into plasma, leaving no evidence of waste.

4、High precision. The focused laser beams have an extremely precise focal edge, allowing you to ablate rust from tough spots that would otherwise be harder to clean with other apparatus. Such include the rust that develops around bolts and rails. Additionally, the high precision allows you to focus the laser beam repeatedly over a specific area to achieve the required depth and result.

5、It’s effective on all surfaces. Unlike other rust removal procedures, laser cleaning works on all surfaces that are prone to rusting, including stones, concrete, iron, aluminum (bauxite) or copper.

6、It does not degrade the substrate. Scrubbing rusted surfaces significantly degrades the substrate due to friction. Rust removing chemicals, on the other hand, are harsh and corrosive, causing wear and tear that could spoil delicate metals or even weaken their robustness. Laser cleaning in comparison ablates the surface while leaving the substrate untouched.

7、It is a long-term solution. A laser cleaning machine will serve you longer than any scrubber or rust removing chemical will. The laser does not suffer any wear or tear, and thus can be used and reused over its lifetime.