CNC Stone Engraving Machine CNC Router Slotting Technology And Advantages

The most safe way to slot the technical knowledge of the cnc stone engraving machine is to perform the down-cutting (clockwise direction) in the direction of the arrow in the direction of the four arrows in the schematic. After completing the four areas, then it is counterclockwise. Sex finishes the entire groove of the body so that the edging knife does not have the problem of pulling out burrs when passing through the previously slashed area. If necessary, after grooving with the engraving machine, the trowel can be used to trim the uneven portion of the rim groove.

All the electrical components are housed and wired in a electrical enclosure. This allows for easy access and service when needed. All wiring is tagged so that when service is required, the customer can easily navigate the cabinet. In addition, the cabinet serves as a work bench for the tools required.

Use a caliper to carefully set the depth of the cnc stone engraving machine, and then find a piece of scrap to check the trimmed groove and the side strip you intend to use. When the long fiber is cut radially to cut the body of the wood, it is easy to pull out the burr. For example, when the guitar body is flanged, four areas are more likely to be pulled out of the burr. Therefore, the four areas should be chamfered first, that is, the cnc stone engraving machine is pulled in the direction of the wood by the cutter head. When viewed from the front of the body, the engraving machine moves clockwise. This will try to avoid the wood being pulled out of the burr.

If you want to slot a curved body such as a mandolin or a curved guitar, using the cnc stone engraving table is the best solution for small studios. Apply a wooden ring of appropriate height to the cutter hole with double-sided tape to raise the body to a suitable height and keep the side of the body perpendicular to the table. The shaft is clamped around the body with a smooth axial clip to stabilize the body at an appropriate height. The position of the clip can be changed when the shaft clip interferes with the edging knife.

The cutter head of the cnc stone engraving fixed under the workbench is used to pry the surface of the workbench from a hole in the workbench, and the side of the body that needs to be grooved is moved toward the workbench. The method of avoiding burrs is the same as when the hand-held engraving machine is operated, and because the engraving machine is fixed and you can move the body with a much lighter weight with both hands, the flexibility of the body control is much better.

Features of cnc stone engraving machine:

1. Steel tube lathe bed,low center of gravity,strong bearing capacity,not easy to deformation,stable and reliable operation.

2. Adopt Ncstudio control system ,through computer operation,easy and simple to operate.DSP handle offline control is optional.

3. Adopt Taiwan linear guide rail. the bearing of the lead guide rail is face to face, the long time use precision is high.

4.Strong compatibility: compatible various CAD/CAM software like Type3/artcam/castmate/proe/Corelerow/Wentai.

5.Adopt High power frequency changing water cooled spindle,providing excellent cooling effect when carving flinty materials,effectively protect spindle when continuous working for a long time.

Scope of Application

cnc stone engraving application:

* Bas-reliefs, 

* Line engraving Cutting, Edge inversing

* Funeral tablets/gravestones, Milestones

* commemorative plates

* Furniture, Fireplace.

* Countertops, Sink hole, grooving, shower trays