Common Fault Analysis Of Granite Engraving Machine

When we use the granite engraving machine, we cannot avoid this or that kind of problem. This is a normal thing for a device. But when we face this situation, we must solve it in time, so as to ensure the smooth operation of machinery and equipment, and also to work better and improve work efficiency.

Stone carving machine is also called CNC marble engraving machine, cnc granite engraving machine. It is mainly for stone/granite/marble engraving and carving, now it is for sale at the best price, stone CNC is equipped with CNC kit of water cooling spindle, which has the advantages of better cooling, high speed & accuracy. It is a popular stone machine for stone/marble engraving & carving.

CNC stone engraving machine Failure Analysis:

Output failure

1. No output, please check if the computer and the control box are connected correctly.

2. Check if the space in the engraving manager is full, then delete unused files in the manager.

3. If the wiring of the signal cable is loose, please check carefully whether each circuit is connected.

Folding overtravel alarm:

Overtravel alarm indicates that the machine has reached the limit during operation. Please check the following steps:

1. Is the size of the designed graphics beyond the processing range?

2. Check if the motor shaft and screw connection of the machine are loose. If it is, tighten the screw.

3. Is the machine and computer properly grounded?

4. The current coordinate value is beyond the software limit value range.

incorrect carving or size.

Solution:

1. Check whether the path of engraving software is correct or not;

2. Check the gap size of the screw rod and whether the fastening screw of the polished rod is loose;

3. Check whether the software parameters are set correctly.

Folding overtravel alarm and release:

During the overtravel, all movement axes are automatically set in the jogging state. As long as the manual direction key is held down, the connection state will be resumed at any time when the machine leaves the limit position (ie, it is out of the over-travel point switch).

CNC stone engraving machine fails to engrave

1. Whether the screws of each part are loose.

2. Check that you are dealing with the correct path.

3. If the file is too large, millions of computers process the error.

4. Increase or decrease spindle speed to suit different materials (usually 8000-24000)

5. Release the knife holder, clamp the knife in one direction, and place the knife straight to avoid carving objects.

6. Check the tool for damage, replace with a new tool, and re-engrave.

Adhering to the spirit of ""Quality First and Customer First", IGOLDENCNC has grown into a responsible and innovative manufacturer of engraving machines. Not only in China .if you want to buy stone carving machine, wood engraving machine. We will provide you with the best service.