High Production CNC Plasma Machine For Sale

CNC plasma cutter table is an automatic CNC cutting machine tool that uses the heat of the high-temperature plasma arc to melt and evaporate the metal part at the incision of the workpiece, and uses the momentum of the high-speed plasma to remove the molten metal to form an incision. 

we will explain to you some points to note when using cnc plasma machine for sale outdoors:

Summarize the following suggestions for your reference. It is not difficult to use today's most advanced plasma system. Even the operator who uses the CNC plasma cutting machine system for the first time can achieve high-quality cutting within a few minutes of operating the plasma torch. When using an air plasma system, no gas adjustment is required. And with an internal fixed cover, the operator does not need to operate away from the machine. In this way, the operator can drag the torch head directly along the workpiece and use the pre-cutting plate, simplifying the cutting. Ergonomically designed torch handle and quick-connect torch technology make operation easier.

1. When it rains, try to keep the CNC system in good condition to prevent water ingress;

2. Always check the oxygen-acetylene pipeline;

3. Check whether there is leakage in the circuit;

4. Wipe the guide rail frequently to prevent rust.

How many types of plasma cutters ?

The most common types of plasma cutters include handheld plasma cutter (portable types) and CNC plasma cutter (hobby CNC and industrial CNC). The most common power supplies include Huayuan plasma cutter and Hypertherm plasma cutter. According to the working methods, plasma cutter kits can be divided into dry plasma kits, semi-dry plasma kits and underwater plasma kits. According to the cutting quality: ordinary plasma kits, fine plasma kits, laser-like plasma kits, and so on. According to the appearance types, plasma CNC cutters can be divided into: 

Portable CNC Plasma Kits The machine is portable, easy to setup, compact in structure, small in space and low in manufacturing cost. However, due to the limitation of the cantilever structure, the stress conditions are poor, the transverse deformation is prone to occur, the transverse cutting width is limited, and the rigidity is poor during high-speed cutting. 

Gantry CNC Plasma Kits The gantry-type supporting method is bidirectionally supported, the force is more uniform, the equipment has good rigidity, and can achieve a large lateral span, usually up to 3 to 10m. However, the equipment installation requirements are high, the structure is relatively large, and it takes up more plant area. The driving mode is divided into unilateral driving and bilateral driving. Unilateral drive and bilateral drive each have their own characteristics and applications. The unilateral drive avoids the high-precision synchronous control and complicated structure of the bilateral drive. However, due to the offset of the center of mass and the driving force does not pass through the center of mass, asymmetric inertial force will be generated during operation, which is prone to vibration, deformation and tilt. Therefore, it can only be used in a small span. The double-sided drive structure is relatively complicated and requires high-precision synchronous control on both sides, which can be used for a larger span and more stable movement. CNC Plasma Table Kits The cutting part and the machine are integrated, which is convenient to move in place, but the movement range of the cutting torch is relatively small, and the cutting width is subject to certain restrictions. 

IGP-1530 Muti-function Plasma machine parameter

Monthly and quarterly maintenance:

(1) Check whether there is rubbish at the main air inlet and whether each valve and pressure gauge is working properly.

(2) Check whether all air pipe joints are loose and all pipes are not damaged. Tighten or replace it if necessary.

(3) Check whether all transmission parts are loose, check the meshing of gears and racks, and make adjustments if necessary.

(4) Loosen the clamping device and push the pulley by hand to see if it comes and go freely. If there is any abnormality, adjust or replace it in time.

(5) Check the clamping block, steel belt, and guide wheel for looseness and tightness of the steel belt, and adjust if necessary.

(6) Check the power cabinet and operation platform, whether the fastening screws are loose, use a vacuum cleaner or a blower to clean the dust in the cabinet. Check whether the wiring head is loose (refer to the electrical manual for details).

(7) Check the performance of all buttons and selector switches, replace damaged ones, and finally draw comprehensive inspection graphics to test the accuracy of the machine.