How To Deal With The Large Gap Of Laser Metal Cutting Machine

Laser Metal Cutting Machine is used for personalized and custom metal signs, metal arts, metal crafts, metal tags, metal logos, metal words, metal letters of stainless steel, carbon steel, brass, aluminum, alloy, rare metal and other metal materials. The laser cutter metal can be used for cutting both sheet metal and metal tubes. 

When using a Laser Metal Cutting Machine processing, sometimes there is a large cutting gap, which leads to a decrease in the cutting precision of the workpiece, and does not meet the production requirements.

HIGH-PRECISION TRANSMISSION SYSTEM

Taiwan T-win double drive rack guide, Japan Panasonic drive motor, Japan Shimpo reducer
The positioning accuracy of the affordable laser cutter is 0.02mm, and the repeated positioning accuracy is 0.02mm.

VERTICAL LCD DISPLAY SCREEN DESIGN

The 21.5‘ vertical screen display is different from the traditional horizontal screen display. The response speed reaches 8ms, the resolution reaches 1080p, the screen ratio is optimized to 16:9, the power consumption is low, and the control software interface and human browsing habits are better adapted. In addition, it has a high brightness level and low reflectance, and the sturdy glass panel has sturdiness and durability.

The technical engineer concluded three fiber laser cutting solution for your reference .

1). Check if there is a problem with the focus length.

In particular, pay attention to the change in focal length after cleaning the lens and replacing the new lens, and adjust the correct focal length value!

2). Check the focus lens / protect mirror is damage or dirt

Because this situation will cause the laser to scatter and the laser beam become thicker, replacing or cleaning the lens is the only way

3).check and guarantee all the laser come out from the nozzle.

If the laser cutter metal can't be vertical and centered out from the cutting nozzle, this also cause the laser beam to be too thick.

Laser Metal Cutting Machine Application:

Suitable for stainless steel, carbon steel, silicon steel, aluminum alloy, titanium alloy, galvanized steel, aluminum-plating zinc plate, copper, and other metals.