Stone Cutting Machine Granite Engraving Machine For Sale

Stone cutting machine classify products are mainly used to cut small specification stone slab materials, such as marble, granite, artificial stone etc. The main products include: 4 heads bisected stone cutting machines, 4 heads stone cross cutting machines and 6 heads stone cross cutting machines, and other specially customized small stone cutting machines etc. The cutting head adopts precise dovetail groove structure, with high cutting precision. The cutting blades adopt 250mm-300mm diamond saw blades, good cutting effect without chipping. The cutting angle can be adjustable, such as stone cross cutting machine, the cutting head can do vertical and horizontal cutting. Also it can add the rotated cutting head, the cutting head can do angle cutting range from 0~180 degree.

1. Composition and use

The stone cutting machine is suitable for all kinds of stone, building materials, ceramic tiles, granite, marble, cement boards, red bricks, refractory bricks, etc. It is an indispensable weapon for home decoration.

The stone cutting machine can cut stones at different depths respectively, which can greatly save stone resources and also help protect the environment. Various types of stones can be mechanically cut, and the processing efficiency is high. In addition, the effective use of small stones makes the production cost lower.

2. Operation precautions

Before work:

Wear work clothes, goggles, and work caps.

2. Carry out detailed inspection on the power switch, the tightness of the saw blade, the saw blade guard or the safety baffle. The operating table must be stable, and there should be sufficient lighting for night operation.

3. Turn on the main switch, try a few turns without load, and allow it to start after confirming safety.

At working:

It is strictly forbidden to operate with gloves. If dust is caused during operation, wear a mask or face shield.

2. Do not try to cut small unclamped workpieces.

3. The granite engraving machine is only allowed to cut profiles.

4. Do not perform strong cutting operations, and make the motor reach full speed before cutting.

5. No one is allowed to stand behind the saw.

6. Do not lean over or bypass the saw, and do not loose any hand or raise the arm from the saw or workpiece when the saw blade is not stopped.

7. Do not operate when the guard is not in place, and do not put your hands within 15 cm of the saw blade.

8. Before repairing or replacing parts, you must cut off the power supply and wait for the saw blade to stop completely. 9. If any abnormal sound is found, the inspection should be stopped immediately.

After work: 1. Turn off the main power supply 2. Clean and tidy up the workbench and the site

Granite engraving machine features:
1, a multi-purpose machine, flexible four axis
2. Simple operation and accurate processing
3. Automatic measurement and intelligent import
4. Realize networking and remote control
5. Automatic chuck moving plate and avoiding saw marks
6. Photo typesetting and grain cutting as needed
7. Simple and intelligent, ready to learn and use

Product Details

Water Cooling Spindle

This machine adopts water cooling spindle, which has the advantage of high efficiency, high speed, low noise.

Fuling Inverter

This inverter has stable performance, rich combination of functions.

Dsp A11 Control

This machine adopts a DSP A 11 control system, which is more convenient and easy to operate.

FL118 Stepper Motor

Compared with ordinary motors, this type of motor has the features of simple structure, convenient control.